Hello,
I think there is a problem with my bike and I hope you can advise please?
I wanted to set my bike to Stage 3 and carefully looked at the diagram sent by BBPower. For stage 3 it has pins 2 and 6 shorted. (as you look at the bike from the left, thats bottom centre (2) to middle left (6).
When I turned on the bike, the fuel pump was running all the time and the bike wont start. I have also tried this again with no pins connected and the same happens.
Can you advise please?
gutted
Disaster strikes... maybe
Moderators: Gromit, Paul, slparry
Disaster strikes... maybe
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
I have just come in from refitting the standard chip... all ok.
I suspect a problem on the bloody chip... will try your suggestion tomorrow, although i would imagine it would have had a problem when i fitted the original back in. What a bugger.
BBPwer sent me a fitting diagram for the noe 2003 onwards ie up to 2003.. It has pins 2 to 6 connected as stage 3, whcih is exactly what i did.
Miffed now... but thansk for the reply
I suspect a problem on the bloody chip... will try your suggestion tomorrow, although i would imagine it would have had a problem when i fitted the original back in. What a bugger.
BBPwer sent me a fitting diagram for the noe 2003 onwards ie up to 2003.. It has pins 2 to 6 connected as stage 3, whcih is exactly what i did.
Miffed now... but thansk for the reply
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
-
- Posts: 7
- Joined: Wed Dec 01, 2004 4:32 am
- Location: Chicago, IL, EEUU ('cross the pond)
- Contact:
its a chip/software problem .....
wrong chip/software version for your bike more likely....
check out this similar problem occuring with the laser chips on pelican...
http://forums.pelicanparts.com/showthread.php?s=&threadid=169702&highlight=fuel+pump+chip+shut+off
wrong chip/software version for your bike more likely....
check out this similar problem occuring with the laser chips on pelican...
http://forums.pelicanparts.com/showthread.php?s=&threadid=169702&highlight=fuel+pump+chip+shut+off
It was fitted by BMW so its the right chip. I had it running on stage 2 fine... but added lennies etc and all i did was to switch off. remove faring and instead of no connectors at all, connected 2 to 6 for stage 3....
I agree its a chip problem though... thought maybe i'd connected wrong pins but have double checked the diagram directly sent from BBPower last week.
It does differ from the one that someone else has on the forum, but i did email BBPower and confrim it was for my bike (2002, non twin spark)
cheers
I agree its a chip problem though... thought maybe i'd connected wrong pins but have double checked the diagram directly sent from BBPower last week.
It does differ from the one that someone else has on the forum, but i did email BBPower and confrim it was for my bike (2002, non twin spark)
cheers
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
Who is online
Users browsing this forum: No registered users and 272 guests