Disaster strikes... maybe

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Disaster strikes... maybe

Postby PBBoxer » Sat Dec 04, 2004 1:57 pm

Hello,
I think there is a problem with my bike and I hope you can advise please?
I wanted to set my bike to Stage 3 and carefully looked at the diagram sent by BBPower. For stage 3 it has pins 2 and 6 shorted. (as you look at the bike from the left, thats bottom centre (2) to middle left (6).

When I turned on the bike, the fuel pump was running all the time and the bike wont start. I have also tried this again with no pins connected and the same happens.

Can you advise please?
gutted
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary

User avatar
stempy
Captain
Posts: 690
Joined: Wed Feb 18, 2004 8:41 pm
Location: I could tell you but then I'd have to kill you
Contact:

Postby stempy » Sat Dec 04, 2004 4:44 pm

You shouldn't be able to blow the chip up from the code connector unless you've connected it to something else. Try pulling the motronic fuse to reset it. If this fails you could try reseating the chip. If that fails, refit the standard chip to make sure everything else is ok.

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Postby PBBoxer » Sat Dec 04, 2004 5:50 pm

I have just come in from refitting the standard chip... all ok.
I suspect a problem on the bloody chip... will try your suggestion tomorrow, although i would imagine it would have had a problem when i fitted the original back in. What a bugger.
BBPwer sent me a fitting diagram for the noe 2003 onwards ie up to 2003.. It has pins 2 to 6 connected as stage 3, whcih is exactly what i did.
Miffed now... but thansk for the reply
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary

drex
Posts: 7
Joined: Wed Dec 01, 2004 4:32 am
Location: Chicago, IL, EEUU ('cross the pond)
Contact:

Postby drex » Sat Dec 04, 2004 5:50 pm

its a chip/software problem .....

wrong chip/software version for your bike more likely....

check out this similar problem occuring with the laser chips on pelican...

http://forums.pelicanparts.com/showthread.php?s=&threadid=169702&highlight=fuel+pump+chip+shut+off

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Postby PBBoxer » Sat Dec 04, 2004 5:54 pm

It was fitted by BMW so its the right chip. I had it running on stage 2 fine... but added lennies etc and all i did was to switch off. remove faring and instead of no connectors at all, connected 2 to 6 for stage 3....
I agree its a chip problem though... thought maybe i'd connected wrong pins but have double checked the diagram directly sent from BBPower last week.
It does differ from the one that someone else has on the forum, but i did email BBPower and confrim it was for my bike (2002, non twin spark)
cheers
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary

User avatar
boxerpan
Posts: 2234
Joined: Thu Feb 19, 2004 6:48 pm
Location: waving, not drowning. Warwicks

Postby boxerpan » Sat Dec 04, 2004 9:28 pm

PBBoxer wrote:It was fitted by BMW so its the right chip.


:lol: :lol: Ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha :lol: :lol:
Lloyd

It's not how fast you ride, it's how you ride fast.
Light travels faster than sound. That's why some people appear
bright until you hear them speak.

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Postby PBBoxer » Sun Dec 05, 2004 12:25 am

I'm still laughing
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 300 guests