Thinking of buying an R1100S and need advice

Pull up a chair - let's talk Boxerbollox

Moderators: slparry, Gromit, Paul

lamurada
Posts: 5
Joined: Sat May 20, 2006 1:06 pm
Location: Worcestershire
Contact:

Thinking of buying an R1100S and need advice

Post by lamurada »

Hi there everyone , i am new to this forum and as i am thinking of changing my current Honda VFR800Fi for an R1100S i wondered if you could offer some advice on this machine.
I am not exactly new to BMW as i have owned an F650GS, although i appreciate that it is probably totally unlike the R1100S in every wayso...any advice on things to look out for when purchasing second hand.
I have a limited budget so will probably be an early examplr 1998 - 2000 i would expect with as low mileage as poss.

Thanks in advance everyone.

Martin
User avatar
Gromit
Posts: 5706
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck
Contact:

Post by Gromit »

Hi Martin - welcome to our merry band :)

I've owned a Viffer 800 and more than one 1100S so hopefully will be able to give some pointers.

The BM does feel somewhat crude when ridden back to back with the VFR - it's nowhere near as smooth, doubt it'll be as reliable nor is it as well finished (however my '00 model VFR wasn't all that great it has to be said). On the other hand, the BM's more fun, handles better and on real roads is going to be just as quick. Stick a passenger on the S and you'll hardly know they're there - I found even putting someone light on the back of my VFR upset it (and she's only 8 stone...aren't you dear?? ;) )

Personally, unless you know the S's history (ie you get it off a mate) I'd be tempted to buy a machine from a dealer. Sure, it'll cost more but values of 1100S's have gone down quite noticably in recent times. Main thing is that it'll have a warranty.

Bikes which have done less than 10-15k won't be run-in and will be rough vibration-wise (although this can vary from bike to bike).

Best thing is to get a ride on a used bike at a dealer and see if you like it. Ride it for 10 mins and you'll probably hate it, ride it for half a day and you'll know whether it's the bike for you or not. If it is, you may well become hooked - I've gone to pastures new sometime ago, but still rate the S as one of the most satisfying bikes to ride in my 25 years of biking.
winger

Post by winger »

Richards covered most of the bases,VFR V 1100s really is a personnel thing,i'd say most people would prefer the VFR on a percentage basis,haveing a friend who's VFR mad,i reckon must hold some kind of title for the number of miles ridden with someone on a Viffer,their great bike for all seasons a great alrounder.

I've ridden a couple,i thought they were both crap!!! completely souless,and had to play 'dixie' on the gear lever to get it to do anything!!two opposeing views from the same person!!!!

Chris
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges
Contact:

Post by Boxadog 2000 »

Contact Archie he has a one for sale I beleive

Bob
lamurada
Posts: 5
Joined: Sat May 20, 2006 1:06 pm
Location: Worcestershire
Contact:

Post by lamurada »

Thanks guys.....as for comparisons pretty much what i thought you might say and i understand that the VFR and BMW are very different beasts designed to do a very similar job.
What i need to know now is the potential used R1100S failings like engine case corrosion, strange engine noises etc to look out for on used examples, wether they are from a dealer or private purchase.

Thanks again

Martin
User avatar
Gromit
Posts: 5706
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck
Contact:

Post by Gromit »

Martin - hope some of this info will help...

1. Finish can be pretty poor - engine case paint/paint on the forks falls off
2. Discs have been known to warp (they don't have separate carriers and bolt directly to the wheel)
3. Gearbox/engine oil seals can fail - slipping clutch when warm
4. Paralever bearings can fail at 20000+ miles. Not difficult to replace but a faff all the same
5. Leaking bevel box seals - check for oil weeping from the rear rubber gaiter on drive shaft.
6. Engine itself is pretty much bulletproof.

Not the rosiest of pictures perhaps, but on the whole the S is a very reliable bike. Plenty of guys on here with high mileage (70k+)

hth
winger

Post by winger »

Not so much the bike!!!,the board has a low bullshit level,just because we own one doesn't mean were blinkered.
theseadog
Posts: 572
Joined: Sun Mar 14, 2004 12:47 pm
Location: Official Club Scotsman, West Coast Of Scotland
Contact:

Post by theseadog »

lamurada wrote: What i need to know now is the potential used R1100S failings like engine case corrosion, strange engine noises etc

Ah they all do that sir.

It's a topping good bike, which I chopped my last vfr for a few years back, having gone 750 > 800 > 750 again 'cause the 750 was the best ( imho ) However after an hour or so on the S the vfr seemed gutless, souless and too much like hard work. The S for me anyway ticks all the right boxes, I still like the vfr, just not as much as the S, which I guess says it all. Get a test ride preferabley a half day as has been said and then decide. I'd agree that the problems are mostly cosmetic, other than the odd seal and bearing, nothing to add the mentioned faults tbh. The plus side however is it's a peachy bike to work on with dead easy access for most things.

Toodle Pip
:wav:
Cheers
PAul

Keep it sticky side down.

Image
Me-109
Posts: 863
Joined: Mon Feb 06, 2006 12:13 pm
Location: Trauma Ward
Contact:

Post by Me-109 »

You guys forgot to add some of the more obvious points:

ABS is ok until it fails, but then you just throw away the pump and go with straight lines.
ABS and/or heated grips fitted as standard get you the larger alternator to power them. Retrofitted stuff may not have that.
Low battery power plays havoc with an ABS bike and keeps giving you idiot lights as the least worrying part of that.
Centre-stands were optional extras. Paddock stands are a different pan of trout.
Wider 5.5" rear wheels to take common 180 tyres were optional. 5" wheels should not have 180s on, just 170s.
Finish is actually pretty resilient (in my experience of them) and a good wash really brings them up easily.
Shaft drive save money on chains/sprockets.
Shaft drive costs money when seals go - but much less if you can weild spanners yourself.
It shakes, vibrates, buzzes (though not uncomfortably) and will allegedly touch it's heads down as soon as you look at a corner.
It has character.
It has to be leaned a looooooooooong way, actually.
The brakes are *good*. :shock:
It still looks good with pannier rails on - can't say that about most bikes.
It sounds like nothing else.
theseadog
Posts: 572
Joined: Sun Mar 14, 2004 12:47 pm
Location: Official Club Scotsman, West Coast Of Scotland
Contact:

Post by theseadog »

Me-109 wrote:You guys forgot to add some of the more obvious points:

ABS is ok until it fails, but then you just throw away the pump and go with straight lines.
ABS and/or heated grips fitted as standard get you the larger alternator to power them. Retrofitted stuff may not have that.
Low battery power plays havoc with an ABS bike and keeps giving you idiot lights as the least worrying part of that.
Centre-stands were optional extras. Paddock stands are a different pan of trout.
Wider 5.5" rear wheels to take common 180 tyres were optional. 5" wheels should not have 180s on, just 170s.
Finish is actually pretty resilient (in my experience of them) and a good wash really brings them up easily.
Shaft drive save money on chains/sprockets.
Shaft drive costs money when seals go - but much less if you can weild spanners yourself.
It shakes, vibrates, buzzes (though not uncomfortably) and will allegedly touch it's heads down as soon as you look at a corner.
It has character.
It has to be leaned a looooooooooong way, actually.
The brakes are *good*. :shock:
It still looks good with pannier rails on - can't say that about most bikes.
It sounds like nothing else.
Fair enough, wasn't considering ABS bikes at all :oops: sorry, but you're right rip it out and toss it. :wink:

Hawker Odessey Battery will solve any ABS low battery power issues :D

I don't have the bigger alternator and run heated grips, intercom, a set of PIAA's and have never had any problems with power.

Centre stands won't fit with Boxercup belly pans, forgot that, sorry :oops: . However paddock stands are easy to come by, and even better you can get an ABBA fitment for the S.

Never had any problem getting those rare 170 section tyres :wink: The wheel size is stamped on the spokes near the hub on the right hand side so you can check if it's a 5 or 5.5

Got to disagree on the sound, at tickover it sounds just like a tractor with gravel in it's oil ! :shock::lol:

Other than that yep it's all (mostly ) good

Toodle Pip
:brave:
:wav:
Last edited by theseadog on Sun May 21, 2006 4:04 pm, edited 1 time in total.
Cheers
PAul

Keep it sticky side down.

Image
lamurada
Posts: 5
Joined: Sat May 20, 2006 1:06 pm
Location: Worcestershire
Contact:

Post by lamurada »

Thanks all this info is really interesting, i will contact my local dealer for a test ride as i know they have 3 used examples in stock and one is i believe the boxer cup edition.
Does anyone know the insurance group so i can compare to VFR800fi group?

Thanks again

Martin
User avatar
tripe
Posts: 669
Joined: Sat Aug 20, 2005 1:25 pm
Location: West London
Contact:

Post by tripe »

check out ebikeinsurance.co.uk it halved my annual premium
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2911
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Post by Paul »

lamurada wrote:Thanks all this info is really interesting, i will contact my local dealer for a test ride as i know they have 3 used examples in stock and one is i believe the boxer cup edition.
Does anyone know the insurance group so i can compare to VFR800fi group?

Thanks again

Martin
NU13 insurance

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
winger

Post by winger »

A haa something else we haven't covered!!! don't get carried away with the Boxercup thing,performance wise their barely able to put a nano second on a stocker,just taller,louder,and a fancy paint job.

Look for a bike with the right bits on,aftermarket shocks,carbon induct(look inside the front of left hand fairing panel),a decent set of exhaust cans, and multitude of other bits,all of which can transform the S,it's a world away from a Viffer in that sense
theseadog
Posts: 572
Joined: Sun Mar 14, 2004 12:47 pm
Location: Official Club Scotsman, West Coast Of Scotland
Contact:

Post by theseadog »

Come now Chris, you're surely not suggesting that every mag review I've ever read that says that the BCR has an extra 10 hp is wrong surely . . . . . as if Journos would say something untrue . . . . pfff

That's a good point actually and one that we'd all forgotten to mention, and good advice regarding the add-ons, that'll be an extra gold star in your jotter at the end of class then ! :wink:

Toodle Pip
:wav:
Cheers
PAul

Keep it sticky side down.

Image
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: Google [Bot] and 4 guests