DIY gear indicator

As it says; what you've done to your bike and how it helped make it better.

Moderators: Gromit, Paul, slparry

Post Reply

Are you insterested into buying a kit?

 
Total votes: 0
FuzzyEdges
Posts: 22
Joined: Mon May 03, 2021 10:39 am
Location: Monmouthshire

Re: DIY gear indicator

Postby FuzzyEdges » Mon May 10, 2021 9:10 pm

Looking good. That display is right up my Straße and I'd be in the market for one.
Last edited by FuzzyEdges on Tue May 11, 2021 8:41 pm, edited 1 time in total.
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Tue May 11, 2021 4:33 am

Hang on. The project is on hold while I continue to reassemble my bike... :D
R1100S / VIN ZA82517 : Image
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Mon Jul 05, 2021 9:14 am

I finally made some progress over the week end.
After many 3d print trials, I have finally found a way to hold the display in place securely on the dashboard. And this won't require any modification to the original parts.
Image

Now, my prototype is ready to go in the motorcycle.
Image
R1100S / VIN ZA82517 : Image
Top
User avatar
Phil K
Member
Posts: 187
Joined: Tue Feb 13, 2007 9:26 am
Location: North Yorks

Re: DIY gear indicator

Postby Phil K » Mon Jul 05, 2021 9:50 am

Looking good, definitely up for one of these!

Phil
R11s + Val Singleton Power filter - Lennies induct - Y Piece - Wilbers - PC111
1974 Honda CB750 1974 Triumph Trident T150 Oh and a GS-LC
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Tue Jul 06, 2021 4:10 am

Image
Image
R1100S / VIN ZA82517 : Image
Top
User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Re: DIY gear indicator

Postby Blackal » Tue Jul 06, 2021 12:11 pm

That looks cool as hell!!
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works ..... :?
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Mon Aug 09, 2021 10:54 am

Test with direct sunlight :
https://youtu.be/J4na_mzURW4
R1100S / VIN ZA82517 : Image
Top
Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: DIY gear indicator

Postby Humbug » Mon Aug 09, 2021 8:07 pm

Looks great!
11 plate KTM SMT
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Re: DIY gear indicator

Postby Paul » Tue Aug 10, 2021 8:55 am

Nice work Buzz90. If I still had an 1100S, I'd order one without hesitation.

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
FuzzyEdges
Posts: 22
Joined: Mon May 03, 2021 10:39 am
Location: Monmouthshire

Re: DIY gear indicator

Postby FuzzyEdges » Fri Aug 20, 2021 5:29 pm

That looks great. Ready to order when you're ready!

FE.
Top
User avatar
Hay Ewe^
Posts: 186
Joined: Sat Aug 27, 2016 9:59 pm
Location: Far North Queensland - AUS

Re: DIY gear indicator

Postby Hay Ewe^ » Tue Sep 21, 2021 11:57 pm

This looks GREAT!
I shall do some more reading but it looks like it will fill a gap on my project
(1100GS and I dont think to use the normal RID as I am re-wiring the whole thing)
Thanks!
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Wed Sep 22, 2021 5:35 am

Thanks for all your kind comments.
Sorry for the lack of recent news. After a few weeks of use, I'm working to improve the displayed information.
I shall try to improve direct sunlight readability as well, but that would sacrifice to the global integration of the module...
R1100S / VIN ZA82517 : Image
Top
User avatar
buzzz90
Posts: 167
Joined: Thu Aug 25, 2011 7:17 am
Location: France

Re: DIY gear indicator

Postby buzzz90 » Tue Oct 19, 2021 4:46 pm

Since the last news, the hardware has nearly not evolved (apart from the AR lens).
The software however has changed a lot and especially the display layout.
I mainly wanted the voltage and oil temperature information to be more visible.
I have worked on the logic for the adaptative brigthness and a few other features, but I'll show that in an incoming video.
Let me know if you have remarks on the UI or wishes.
Image
R1100S / VIN ZA82517 : Image
Top
User avatar
jeznewsome
Posts: 341
Joined: Sat Aug 04, 2012 7:30 am
Location: Preston, Lancs

Re: DIY gear indicator

Postby jeznewsome » Tue Oct 19, 2021 5:04 pm

Looking good fella
Top
Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: DIY gear indicator

Postby Humbug » Tue Oct 19, 2021 7:11 pm

Looking great
11 plate KTM SMT
Top
Post Reply

Return to “Boxerspex”

Who is online

Users browsing this forum: No registered users and 33 guests