Belly Pans for R1200S

bikesnbones · Post by **bikesnbones** » Mon Aug 12, 2013 2:13 am

Anyone seen this one ?
The link on the forum I found it produced nothing, so I'm wondering if it's marketed by someone else perhaps.

eyore · Post by **eyore** » Mon Aug 12, 2013 7:47 am

It wont open when you click the pic

Any idea of the wwwoooooo?
Or who is it made by?

David_S_Walker · Post by **David_S_Walker** » Mon Aug 12, 2013 8:12 am

Hello,

I maybe wrong but it looks like a Schnitzer one?

http://www.ac-schnitzer.de/typo3temp/pi ... 0e08c5.jpg

Best regards,

David

bikesnbones · Post by **bikesnbones** » Mon Aug 12, 2013 4:42 pm

David_S_Walker wrote:Hello,

I maybe wrong but it looks like a Schnitzer one?

http://www.ac-schnitzer.de/typo3temp/pi ... 0e08c5.jpg

Best regards,

David

But it looks different to the pic you posted.
Here's the link where I found it, but the link they provide brings up nothing.

http://forums.pelicanparts.com/bmw-r110 ... 1200s.html

David_S_Walker · Post by **David_S_Walker** » Mon Aug 12, 2013 5:19 pm

bikesnbones wrote:
David_S_Walker wrote:Hello,

I maybe wrong but it looks like a Schnitzer one?

http://www.ac-schnitzer.de/typo3temp/pi ... 0e08c5.jpg

Best regards,

David
But it looks different to the pic you posted.
Here's the link where I found it, but the link they provide brings up nothing.

http://forums.pelicanparts.com/bmw-r110 ... 1200s.html

.....I didn't have my specs on!!

Best regards,

David

Neil178 · Post by **Neil178** » Tue Aug 13, 2013 11:20 pm

Shrddr on Pelican got one fitted to his bike a few years ago.
I think that they may have stopped making them.
Such a small market for making any money in.

Try info@hesa-motorsport.de and maybe let us know the outcome?
I'm about to splash the cash on a ACS one.

popsky · Post by **popsky** » Sat Aug 17, 2013 5:47 pm

How about this I know it's out of stock but a quick email to them, it might be worth a punt

http://www.motorrad-saering.de/shop/ind ... cts_id=413

eyore · Post by **eyore** » Sat Aug 17, 2013 6:01 pm

That Saering one is well priced and while I have mixed feelings about bellypans, I would be willing to put my name down for one of those.
As Popsky says, if a few were interested they may mould some.
Just sent them an e mail, so we will see what happens.

eyore · Post by **eyore** » Mon Aug 19, 2013 7:38 am

With typicalGerman efficiency Saering have just replied to my e mail and said they have no problem making a batch of these bellypans. I think at that price you couldent go wrong.
Anyone else interested.?

http://www.motorrad-saering.de/shop/ind ... cts_id=413

slparry · Post by **slparry** » Mon Aug 19, 2013 8:52 am

What about this

http://www.motorrad-saering.de/shop/ind ... cts_id=926

popsky · Post by **popsky** » Mon Aug 19, 2013 9:54 am

slparry wrote:What about this

http://www.motorrad-saering.de/shop/ind ... cts_id=926

That only works with the race headers Steve,(where the pipes go underneath the sump) I'd already asked them that question.

Neil178 · Post by **Neil178** » Tue Aug 20, 2013 7:40 pm

I cant see the price or a photo on that link.
Anyone post them up?

popsky · Post by **popsky** » Wed Aug 21, 2013 10:01 am

Not very good quality I'm afraid, taken off there website

€149 approx

bikesnbones · Post by **bikesnbones** » Fri Aug 23, 2013 5:22 pm

Can anyone read German

http://www.ebay.de/itm/Neuer-Gimbel-Bug ... 3f04454e9d

popsky · Post by **popsky** » Fri Aug 23, 2013 8:02 pm

bikesnbones wrote:Can anyone read German

http://www.ebay.de/itm/Neuer-Gimbel-Bug ... 3f04454e9d

I don't understand why you'd want a part that fits a different bike, bearing in mind the 12R has a oil cooler mounted low between the header pipes, not to mention the price difference of €150.