cbr1200xx

This is the forum for current/former/aspiring 'S owners to discuss their other two wheeled choices.

Moderators: slparry, Gromit, Paul

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

cbr1200xx

Post by PBBoxer »

Image


Its a bit tatty round teh edges but so am I.
Intending to sort it over Winter.
Had a quick check o dyno run today and its putting out 173.17 bhp at rear wheel, about 6 down on quoted. Considering its on old fuel and hasnt had a service for a while its about on the money.
Guy reckons it could do with valve clearances doing and maybe plugs and filter.
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
Black Knight
Posts: 338
Joined: Tue Nov 28, 2006 4:57 pm
Location: York

Post by Black Knight »

Wow :shock:

Very nice. :D
User avatar
throttlemeister
Posts: 1023
Joined: Sun Sep 24, 2006 9:35 pm
Location: Netherlands
Contact:

Post by throttlemeister »

What's been done to it for it to make 173hp at the wheel? Stock blackbirds are lucky to make 150 at the wheel.
Gijs

BMW R1100S | homepage | gallery
BMW K1200S 'tri-color ICBM' | ABS/ESA
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

Stock Blackbirds generally make 135-140 at teh wheel unless power commander cans and filter are fitted, then close to 150

This is a V&M cbr 1200
CArillo conrods, 13 to 1 compression, different cams, 1200cc, full akra etc etc
Only 25 were made of a planned 50, for teh Honda 50th anniversary in 1998. Crank power is 200 bhp or there abouts
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
User avatar
RoLoo
Posts: 1171
Joined: Tue Dec 20, 2005 11:37 am
Location: The Netherlands

Post by RoLoo »

PBBoxer wrote:...this is a V&M cbr 1200
CArillo conrods, 13 to 1 compression, different cams, 1200cc, full akra etc etc...
...impressive...

Image
Have a nice day !
Ron.

R1200S + R1200RT
(RoLoo as in RowLow...)
User avatar
throttlemeister
Posts: 1023
Joined: Sun Sep 24, 2006 9:35 pm
Location: Netherlands
Contact:

Post by throttlemeister »

Damn, never heard of this. Must be a UK special. Now I want one.
Gijs

BMW R1100S | homepage | gallery
BMW K1200S 'tri-color ICBM' | ABS/ESA
User avatar
RoLoo
Posts: 1171
Joined: Tue Dec 20, 2005 11:37 am
Location: The Netherlands

Post by RoLoo »

throttlemeister wrote:...I want one...
...beware ; all right hand drive ones...
Have a nice day !
Ron.

R1200S + R1200RT
(RoLoo as in RowLow...)
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Post by Gromit »

You utter, utter, lucky lucky b*st*rd.

Times 10. :(


(gissa go Paul) ;)
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

No probs
Stoney has just had a go.
Needs fettling though, its a bit untidy.

Hesitant ot constant throttle sometimes too, needs setting up
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Post by Gromit »

PBBoxer wrote:No probs
Stoney has just had a go.
Needs fettling though, its a bit untidy.

Hesitant ot constant throttle sometimes too, needs setting up
8)

Sounds like the carbs may need balancing - I recently balanced mine, which stopped the very slight 'hunting' just above idle in low gears/low engine load. Runs perefectly now.

How many miles has yours done?
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

12800 ish now

its been sttod a lot for teh past 3 years, covering about 600 miles. Needs a good service and carbs set up etc, plus im going to get teh valve clearances done if i can find what they are!
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
Archie
Member
Posts: 751
Joined: Thu Sep 16, 2004 9:24 pm
Location: Scotland

Post by Archie »

Looks very nice, and a damn site more comfy than my Gixxer.

Will be just as stupidly fast too :lol:
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

Blackbird has gone in today to my mates place for:
Removal of foks, re chrome, polish lowers and fit internal ohlins

swing arm off for polish and or clean, replace penske spring

engine covers off for re paint

valve clearances, dyno time for setup

serice

In teh meantime i have all teh bodywork and im going to try and get that sorted
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Post by Boxadog 2000 »

Bout time an all looks a bit of a munter
:oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops:
User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Post by PBBoxer »

thanks very much

fookin quick one tho eh
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary
Post Reply Previous topicNext topic