Those flippin wheel weight sticky pads

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
Jason M
Posts: 1404
Joined: Wed Feb 18, 2004 7:56 am
Location: southampton

Those flippin wheel weight sticky pads

Postby Jason M » Sun Feb 22, 2004 7:07 pm

OK - sugestions on getting the residue left by those self adhesive balance weights off please.

I've tried paraffin and white spirit but they still don't want to come off easily, and I don't want to scrape at them with something sharp.

Is there a secret NUCLEAR option out there please?

Ta
Top
User avatar
bigblackfalco
Posts: 1922
Joined: Wed Feb 18, 2004 10:05 am
Location: Darkest Aberdeenshire

Postby bigblackfalco » Sun Feb 22, 2004 7:25 pm

2 options old bean:
Boiling hot water breaks down the cellulose...should turn into a guey mass.Then wipe with cloth etc.This goes for any sticker.Brilliant for removing tank pads.

Cellulose paint thinners.Works but can be harsh on the original finnish.
HTH?
Bailey.
Top
User avatar
adamski49
Posts: 1004
Joined: Tue Feb 17, 2004 8:59 am
Location: Cambridge

Postby adamski49 » Sun Feb 22, 2004 8:04 pm

If it's the black rubbery stuff I've been fortunate enough to be able to remove it dry just by rubbing it with my finger. This seems to get it to ball up and almost roll off.

Anything that won't shift normally gets attacked with WD40 or polish and as a last resort meths.

I'm a bit sad in that I polish my rims every six months, in fact the last time I had new tyres fitted I polished the complete wheel, spokes and all, before refitting them - this makes removal of dirt etc a hell of a lot easier.

Adam
Forgive me father for I have sinned... ex S owner moved onto pastures new with four cylinders and a chain... and back to a twin, albeit in a V.
Top
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Postby Gromit » Sun Feb 22, 2004 8:07 pm

What Adam said - but as to polishing one's rim....ahem. ;)
Top
User avatar
adamski49
Posts: 1004
Joined: Tue Feb 17, 2004 8:59 am
Location: Cambridge

Postby adamski49 » Sun Feb 22, 2004 8:39 pm

Gromit wrote:What Adam said - but as to polishing one's rim....ahem. ;)


Yep, I realised what I'd typed, and well... :oops:
Forgive me father for I have sinned... ex S owner moved onto pastures new with four cylinders and a chain... and back to a twin, albeit in a V.
Top
User avatar
RiceBurner
The Mirthman Prophecy
Posts: 1160
Joined: Wed Feb 18, 2004 10:30 am
Location: Hiding in your blind spot....
Contact:
Contact RiceBurner

Postby RiceBurner » Mon Feb 23, 2004 10:04 am

hair-dryer..... :D

less messy than boiling water and less likely to scald... ;) :D
non quod, sed quomodo
Top
User avatar
Frenchie
Posts: 62
Joined: Thu Feb 19, 2004 5:43 pm
Location: Herts & Brittany
Contact:
Contact Frenchie

Postby Frenchie » Mon Feb 23, 2004 7:57 pm

Pinch the wife/girlfriends nail varnish remover works a treat, good for tar spots aswell,

Andy :D
Life is an illusion caused by lack of alcohol.
Top
User avatar
stempy
Captain
Posts: 690
Joined: Wed Feb 18, 2004 8:41 pm
Location: I could tell you but then I'd have to kill you
Contact:
Contact stempy

Postby stempy » Mon Feb 23, 2004 11:29 pm

You can buy label remover aerosols from hardware stores, that usually works if you leave it to soak in a bit.
Top
User avatar
crucial
Member
Posts: 268
Joined: Fri Feb 20, 2004 9:12 am
Location: Probably filtering on the M25

Postby crucial » Tue Feb 24, 2004 1:43 pm

Petrol works for me and luckily there's usually a tank of it nearby :wink:
Top
User avatar
Gats
Posts: 238
Joined: Tue Feb 17, 2004 8:41 am
Location: Back in Oz...

Postby Gats » Wed Feb 25, 2004 7:23 pm

Try some of that citrus based muck remover. Works well and make your rim smell like an orange orchard... if you know what I mean.
Gary Rose.
'06 R1200S Titanium with farkles - Moristech Pro Sequential Interceptor, full Remus system, carbon bits
'12 Tiger Explorer, loaded
'15 Triumph Thruxton ACE Cafe (hers)
-------------
A little inaccuracy saves a tonne of explanation.
Top
User avatar
gus
Member
Posts: 2418
Joined: Thu Feb 19, 2004 5:10 pm
Location: birmingham

Postby gus » Wed Feb 25, 2004 10:35 pm

Gary rose..aka The Rim Sniffer!
Make what you will of that.
gus
sorry i couldnt resist.
Top
User avatar
Gats
Posts: 238
Joined: Tue Feb 17, 2004 8:41 am
Location: Back in Oz...

Postby Gats » Wed Feb 25, 2004 11:53 pm

Geez, Gus, considering your post in the Hello thread in Boxerbanter, I'm not sure of that's a compliment or not! :wink:
Gary Rose.

'06 R1200S Titanium with farkles - Moristech Pro Sequential Interceptor, full Remus system, carbon bits

'12 Tiger Explorer, loaded

'15 Triumph Thruxton ACE Cafe (hers)

-------------

A little inaccuracy saves a tonne of explanation.
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 146 guests