Tucked up in bed...
...nother bike.
Moderators: Gromit, Paul, slparry
...nother bike.
I know it was mentioned in 'banter but just thought I'd do the right thing, and put the new steed in the correct forum.
Tucked up in bed...
Tucked up in bed...
-
Boxadog 2000
- Member
- Posts: 1908
- Joined: Wed Feb 18, 2004 8:29 pm
- Location: Looking over hedges
herrman wrote:Needs Riding!! Sod the cleaning, Unless someone wants to call at mine and drink plenty of free coffee whilst they clean my bike!!!!!!!!!!!
Peter.
Done over 600 miles since last saturday guv'nor!! Mind you, looking at the weather outside, reckon I'll be doing about 6 (or less) in the next few days.
Must admit to not doing not that many miles on the GS since Kendal last September, But it is now wearing a new set of boots ready for Wales next weekend, Shap for easter(Lamb Henry anyone) Then it will the mass meet at Burton and away to France for the end of May. Age seems to be taking its toll as far as riding through the winter is concerned!!!!
Peter.
Peter.
Huw wrote:I must be going soft in the head but......that is a thing of great beauty, drool!
Huw
Huw - surely you're not that drunk at five to 11 on a saturday morning??
Had a good 'dust-up' with a guy on a 955 Speed Triple this morning on some of the Chiltern backroads. Nothing silly (ie we were travelling quickly but being safe about it) but certainly not hanging around. We both pulled into Hugnenden M40 where we stood chatting for quite a while. He wasn't quite sure what sort of bike had been following - when he saw the HD badge he was...let's say slightly 'surprised'.
Turns out he was an off-duty bike copper - hence the fact he was making 'progress'.
Nice bloke actually - he even mentioned the fact that my bike was a bit 'too quiet'.
...must admit : a good looking bike !
...but how about this :
• 1300 Screamin' Eagle® Revolution Silver and Polished Powertrain
• 75 mm Crankshaft
• 105 mm Big Bore High Compression Pistons and Custom High Strength Ductile Iron Sleeves
• Hi-Flow Heads with Oversized Valves
• High Lift Intake and Exhaust Cams with Optimized Timing
• 58 mm Throttle Bodies
• Dyno Tuned Velocity Stacks
• Custom Ceramic Coated 2 into 1 Stepped Header Race Exhaust System
• Multi-Stage Lock Up Clutch
• Two-Tone Paint with Helicone Metallic Additive
• 168 PK Rear Wheel HorsePower
• Length including wheelie bar: 3,7 m
...you can find these one's at the V-Rod Destroyer-Cup 2006
• first race 16 - 18 June. Tsjech, Hoskovice.
• second race 30 June - 2 July in Luckau.
• third race 21 - 23 July. In Switzerland, Turtmann.
• last race 18 - 20 August in Holland, Drachten.
...but how about this :
• 1300 Screamin' Eagle® Revolution Silver and Polished Powertrain
• 75 mm Crankshaft
• 105 mm Big Bore High Compression Pistons and Custom High Strength Ductile Iron Sleeves
• Hi-Flow Heads with Oversized Valves
• High Lift Intake and Exhaust Cams with Optimized Timing
• 58 mm Throttle Bodies
• Dyno Tuned Velocity Stacks
• Custom Ceramic Coated 2 into 1 Stepped Header Race Exhaust System
• Multi-Stage Lock Up Clutch
• Two-Tone Paint with Helicone Metallic Additive
• 168 PK Rear Wheel HorsePower
• Length including wheelie bar: 3,7 m
...you can find these one's at the V-Rod Destroyer-Cup 2006
• first race 16 - 18 June. Tsjech, Hoskovice.
• second race 30 June - 2 July in Luckau.
• third race 21 - 23 July. In Switzerland, Turtmann.
• last race 18 - 20 August in Holland, Drachten.
Have a nice day !
Ron.
R1200S + R1200RT
(RoLoo as in RowLow...)
Ron.
R1200S + R1200RT
(RoLoo as in RowLow...)
RoLoo wrote:...must admit : a good looking bike !
...but how about this :
• 1300 Screamin' Eagle® Revolution Silver and Polished Powertrain
• 75 mm Crankshaft
• 105 mm Big Bore High Compression Pistons and Custom High Strength Ductile Iron Sleeves
• Hi-Flow Heads with Oversized Valves
• High Lift Intake and Exhaust Cams with Optimized Timing
• 58 mm Throttle Bodies
• Dyno Tuned Velocity Stacks
• Custom Ceramic Coated 2 into 1 Stepped Header Race Exhaust System
• Multi-Stage Lock Up Clutch
• Two-Tone Paint with Helicone Metallic Additive
• 168 PK Rear Wheel HorsePower
• Length including wheelie bar: 3,7 m
...you can find these one's at the V-Rod Destroyer-Cup 2006
• first race 16 - 18 June. Tsjech, Hoskovice.
• second race 30 June - 2 July in Luckau.
• third race 21 - 23 July. In Switzerland, Turtmann.
• last race 18 - 20 August in Holland, Drachten.
Nice
They're quite a beast these - Thames Valley HD's service manager, Chris Mott (all round top bloke and builder of the fastest V-Rod in the UK) has one of these in the workshop. Had a good look over it the other day - it's beautiful. Sounds incredible too.
-
Boxadog 2000
- Member
- Posts: 1908
- Joined: Wed Feb 18, 2004 8:29 pm
- Location: Looking over hedges
...and what about this Screaming Eagle Harley Track Rod...
...took these pictures at the Internation Ducati Club Races at Assen last weekend...
...and this 'thing' was FAST !!
...took these pictures at the Internation Ducati Club Races at Assen last weekend...
...and this 'thing' was FAST !!
Have a nice day !
Ron.
R1200S + R1200RT
(RoLoo as in RowLow...)
Ron.
R1200S + R1200RT
(RoLoo as in RowLow...)
Return to “My other bike's a...”
Who is online
Users browsing this forum: No registered users and 101 guests