Wanted: .... Lennies Intake
Moderators: Gromit, Paul, slparry
Wanted: .... Lennies Intake
Long shot I know but has anyone got one languishing in their garage that needs a new home
--
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Re: Wanted: .... Lennies Intake
I'll keep in touch , I may be removing my 11s from my multibike policy at renewal end of October... Don't be afraid to remind me!
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Re: Wanted: .... Lennies Intake
nab 301 wrote:I'll keep in touch , I may be removing my 11s from my multibike policy at renewal end of October... Don't be afraid to remind me!
--
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Re: Wanted: .... Lennies Intake
I've pinged Mark (Lennie) but 12 months ago he was looking for a new supplier & looking to go down the plastic route as he needed a new manufacturer & costs were coming out around $900 AU ... Not that this helps you but let you know what he say! I do have one, but its only in the garage as its not on the bike; but its one of those items even if i part ways with bike, not sure i will get rid of it.. just in case... there may be a chance one day i could get them sent across if i know someone heading this way to save on some air-fare (i'm originally from Melbourne).
Re: Wanted: .... Lennies Intake
bfisher wrote:I've pinged Mark (Lennie) but 12 months ago he was looking for a new supplier & looking to go down the plastic route as he needed a new manufacturer & costs were coming out around $900 AU ... Not that this helps you but let you know what he say! I do have one, but its only in the garage as its not on the bike; but its one of those items even if i part ways with bike, not sure i will get rid of it.. just in case... there may be a chance one day i could get them sent across if i know someone heading this way to save on some air-fare (i'm originally from Melbourne).
thanks, I'm happy to have plastic rather than CF if it makes it less expensive, seeing as it's hidden away
--
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Steve Parry
Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1
Re: Wanted: .... Lennies Intake
Lennie confirmed, inlet ducts of his variety are a thing of the paste... No more to be reproduced. B
Re: Wanted: .... Lennies Intake
Simples
Take the one you have and make female half moulds from it to lay up as many copies as you want.
Can make them in plastic, Glass or Carbon then and way cheaper than £512 ($AUS900) including the mould material.
Just need to get permission to do it from Mr Lennie if you're going to sell them commercially.
Take the one you have and make female half moulds from it to lay up as many copies as you want.
Can make them in plastic, Glass or Carbon then and way cheaper than £512 ($AUS900) including the mould material.
Just need to get permission to do it from Mr Lennie if you're going to sell them commercially.
John M
Return to “Bits'n'bobs for sale”
Who is online
Users browsing this forum: No registered users and 106 guests