Tired old legs

Pull up a chair - let's talk Boxerbollox

Moderators: slparry, Gromit, Paul

Aladin1
Member
Posts: 20
Joined: Thu Jun 04, 2015 3:50 pm
Location: Leeds, West Yorkshire

Tired old legs

Post by Aladin1 »

I'm sure this will have been asked before but I can't find a link. My old knees can't take being cramped up for longer than an hour with the standard foot pegs on my R1100S. I need to lower them. Any recommendations?
boxerscott
Posts: 3723
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Post by boxerscott »

Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.
User avatar
Al
Member
Posts: 1372
Joined: Thu Nov 03, 2005 9:56 am
Location: Devon

Post by Al »

On a more serious note, I have fitted a kit from wunderlich, uses original pegs and drops them 13 or 40mm along with putting bars above top yoke makes quite a bit of difference, you will probably need new brake lines as well if you raise the bars, about £160 for both.
http://wunderlich.sportouring.net/BMW-R ... ario--1674

Al.
White/red BMW R1200R Sport
Shiny Red Honda Civic
Shiny Silver MR2 vvti Roadster. Going to be sold
White Peugeot Boxer Camper Conversion.
Battle scarred Suzuki Burgman 125,(Mrs Als) going to be sold
Suzuki VanVan 125
Aladin1
Member
Posts: 20
Joined: Thu Jun 04, 2015 3:50 pm
Location: Leeds, West Yorkshire

Post by Aladin1 »

I already have a Shackleton high chair for the wife in the sidecar on my flying brick.

Al....thanks for your suggestions you have confirmed my line of thinking. I bought some bar riser adapters from Suburban Machinery (which were a lot of money for a couple of small aluminium blocks), but I wasn't sure whether to go for the adjustable pegs that offer rotational adjustment as well as lowering. Just probing about for opinions.

Alan
Aladin1
Member
Posts: 20
Joined: Thu Jun 04, 2015 3:50 pm
Location: Leeds, West Yorkshire

Bike now gone!

Post by Aladin1 »

Decided to get me a GS instead of lowering pegs and raising bars (expensive solution), so the 1100S has gone. If anyone is interested I now have new bar risers spare (selling at £60) and a Booster Plug I fitted but only did another 200 miles using it (selling at £60).

Alan
Post Reply Previous topicNext topic