Hi Guys,
I've just gone beyond the 40,000 miles point on my R12S and (fingers crossed) it's has been brilliant so far with only a failed battery and O2 sensor issue. Not bad.
However I can't look past the fact that for a bike that's a fair amount of miles. So I'm looking at what may need done to ensure it does another 40k without issues.
I have had the usual services and have a big service booked for next month however I was wondering if there was anything else I need to have checked to ensure it remains in good condition. Bearings, engine, gearbox etc. . .
Also I need to find a good Ohlins service agent in Scotland, anybody from Scotland know a good specialist up here and also any ideas on an approximate cost for a refurb?
Advice gratefully received!
Cheers
Al
Hit the 40k mark. . .
Moderators: Gromit, Paul, slparry
Hit the 40k mark. . .
--------------------------------
2006 R1200S - Yellow/Black - Gone!
2015 R1200 GS TE - Gone!
2016 S1000 XR - Current
2006 R1200S - Yellow/Black - Gone!
2015 R1200 GS TE - Gone!
2016 S1000 XR - Current
- Dai wiskers
- Member
- Posts: 1262
- Joined: Mon Jul 09, 2012 7:21 pm
- Location: Caerphilly
Others here will be better qualified to answer you but that is no milage for a well looked after boxer just keep up a good maintanence shedule[spellin some words just don't look right no matter how many tines i spell them] and all should be well with the big service comming up all relavent items should be checked so don't worry and enjoy the bike
Hope this helps dai
Hope this helps dai
My bike shines when it rains!!!!!!!!!!!!!!!!!
Dyslexic Dai
Steptoe
http://www.gsshop.biz/
Dan Cata
http://boxer-upgrades.webs.com/
Lennie
http://www.boxer-performance.com/index.html
Dyslexic Dai
Steptoe
http://www.gsshop.biz/
Dan Cata
http://boxer-upgrades.webs.com/
Lennie
http://www.boxer-performance.com/index.html
ERS at Knockhill? http://www.ersracing.co.uk/suspension/4557698374
At 40k I'd be tempted to inspect the final drive unit, changing bearings and seals?
Al
At 40k I'd be tempted to inspect the final drive unit, changing bearings and seals?
Al
If I am ever on life support - Unplug me......
Then plug me back in..........
See if that works .....
Then plug me back in..........
See if that works .....
Who is online
Users browsing this forum: No registered users and 135 guests