paddock stand

boxerpan · Post by **boxerpan** » Thu Mar 18, 2004 5:51 pm

Dear all,
I know it iwas a question raised on Y*hoo but I wasn't listening at the time, SO............please advise what type of stand you can recommend for the S.
Now that the longer Ohlins is on the back and the shorter paralever arm is fitted, my centrestand is worse than useless. The Honda one I have wont fit. I seem to recall ABBA was one thought from some.
Many thanks

Lloyd

winger · Post by **winger** » Thu Mar 18, 2004 8:35 pm

www.Becker-Technik.de

Something different!!!!

Chris

andrew s · Post by **andrew s** » Thu Mar 18, 2004 8:58 pm

Abba do a stand, I have one and it is very good. And if you do, do the unthinkable and sell your 'S' then you can use it on other bikes (with the adaptor)

Andrew

boxerpan · Post by **boxerpan** » Thu Mar 18, 2004 9:18 pm

Looks like becker should enter the shopping dash at Tesco's with a contraption like that.

Lloyd

Gromit · Post by **Gromit** » Thu Mar 18, 2004 9:23 pm

andrew s wrote:Abba do a stand, I have one and it is very good. And if you do, do the unthinkable and sell your 'S' then you can use it on other bikes (with the adaptor)

Andrew

That's good news Andrew - the Laser pipe I'm after for the Roadster means losing the centrestand and I've got an Abba sat in my garage. Wasn't aware that the BM adapters are now available (the R uses the same pivot points as the S).

Bloody superbly made piece of kit the Abba stand - highly recommended.

boxerpan · Post by **boxerpan** » Thu Mar 18, 2004 9:27 pm

Is there one basic model, then adapt with fitting kit ?

Lloyd

Gromit · Post by **Gromit** » Thu Mar 18, 2004 9:30 pm

boxerpan wrote:Is there one basic model, then adapt with fitting kit ?

Lloyd

Spot on Lloyd - have a decko here

I bought mine when I had my Speed Triple - once on the stand it would have taken a bomb going off to knock it over. Sturdy it is.

boxerpan · Post by **boxerpan** » Thu Mar 18, 2004 10:27 pm

Gromit,
many thanks for the site info. Just the job

Anyone else after one while I'm ordering

Lloyd

la4ren · Post by **la4ren** » Fri Mar 19, 2004 8:18 am

He,

what do you think about this one. The best I have seen so far. Will also fit on a BCR

http://www.boxer-design.de/ger/weste.htm

Regs, Henk

twincans2003 · Post by **twincans2003** » Fri Mar 19, 2004 10:17 am

hi boxerpan
i have for sale a becker tecnik one for sale
i have sent you a pm

cheers twin cans

boxerpan · Post by **boxerpan** » Fri Jul 09, 2004 3:07 pm

Tried the abba stand for the first time today without much success - due mainly to the longer ohlins rear shock on the rear combined with the slightly longer sports sidestand. The floor section cannot reach in front of the sidestand and as the lift is operated the sidestand lug snags in the top of the triangular section and stops the system rolling over to the rest position. Anyone else had this problem ? Advice appreciated, many thanks

Lloyd

YouTube · Post by **Paul** » Fri Jul 09, 2004 3:53 pm

boxerpan wrote:Tried the abba stand for the first time today without much success - due mainly to the longer ohlins rear shock on the rear combined with the slightly longer sports sidestand. The floor section cannot reach in front of the sidestand and as the lift is operated the sidestand lug snags in the top of the triangular section and stops the system rolling over to the rest position. Anyone else had this problem ? Advice appreciated, many thanks

Lloyd

Try shorter shocks

boxerpan · Post by **boxerpan** » Fri Jul 09, 2004 4:02 pm

I deserved that for all the fishing I bin doing

Arse

Delpel · Post by **Delpel** » Fri Jul 09, 2004 4:23 pm

Why don't you make one or have one made. I did and it works a treat. Got the design of a dutch chap. It uses bobbins which attach to the rear foot rests. I can email you the plans and post some piccys if some one can host them.

winger · Post by **winger** » Fri Jul 09, 2004 5:24 pm

When i was working on your S last weekend,thought i heard a squeek somwhere,maybe something was tight!!!!! Genuine BM about 150 quid!!!!,and thirty for the front Dennis Trollope Raceing

Chris