Hi,
I read one of the posts on the forum where Gromit was offering advice
about the two types of Remus system for an R1100S.
Apparently one type seems restrictive ??
I ordered Remus pipes for my '05 BCR when I was buying but I didn't
realise that they could be more restrictive than the current Lasers.
Can you give me more details as to which Remus system is good and
which one brings the bike down in power ?
I presume the 2-2 system is where there are two seperate cans under
the tail piece ? If that is so, what form does the "good" system take ?
Thanks in advance for your help,
Mark.
One for Gromit ? (Remus exhausts !)
Moderators: slparry, Gromit, Paul
One for Gromit ? (Remus exhausts !)
1974 BMW R60/5 "Toaster"
1982 BMW R100
1982 BMW R100
- throttlemeister
- Posts: 1023
- Joined: Sun Sep 24, 2006 9:35 pm
- Location: Netherlands
- Contact:
I had a Remus Race, 2 into 2 from memory - came with the bike, not installed.
Put it on, totally killed the 'top end' of the bike (what little there is) without boosting the mid range noticably and didn't sound very special.. may have improved with a chip and dyno time..
took it off and sold it for £200.
They may have changed the design (the bike is from 2000) since, but I believe that the Race was the not good Remus..
Ade

[/img]
Put it on, totally killed the 'top end' of the bike (what little there is) without boosting the mid range noticably and didn't sound very special.. may have improved with a chip and dyno time..
took it off and sold it for £200.
They may have changed the design (the bike is from 2000) since, but I believe that the Race was the not good Remus..
Ade


2000 R1100S Sport
1980 Vespa P125X
1980 Vespa P125X
Try giving Darren at Motorworks 0845 458 0077 a ring from recollection he ran 2 in to 2 remus, bbpower chip and induct.
I would say all you need is the remus/lazer y piece they both fit with your cans and you will get a lot more noise. Get the chip as well, laser not adjustable, bbpower 5 settings including stock.
The remus 2 into 2 look great though
I would say all you need is the remus/lazer y piece they both fit with your cans and you will get a lot more noise. Get the chip as well, laser not adjustable, bbpower 5 settings including stock.
The remus 2 into 2 look great though
Train don't go down there no more
Nick - I've got the 'other' Remus system. It has an empty collector box instead of the cat, then 2 pipes out from the collector into the cans. Apparantly it boosts the mid range grunt I think. Works for me anyway!
Jason
Jason
2002 Black GSA (for random fault analysis and for stealing all my weekends fixing the b'stard)
2000 Black R1100S (for remembering the good old times)
2000 Black R1100S (for remembering the good old times)
Re: One for Gromit ? (Remus exhausts !)
This is the link?bcr_rep05 wrote:Hi,
I read one of the posts on the forum where Gromit was offering advice
about the two types of Remus system for an R1100S.
Apparently one type seems restrictive ??
Mark.
viewtopic.php?t=4167&highlight=remus
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..