After I synced! can I reset these without going through the the whole process again ?
SYNCING THROTTLEBODYS
Moderators: slparry, Gromit, Paul
SYNCING THROTTLEBODYS
I synced the throttlebodys but altered the BBS both sides
After I synced! can I reset these without going through the the whole process again ?
After I synced! can I reset these without going through the the whole process again ?
Its Not a Phase, Its My Life,
Its Not a Hobby, It's. My Passion,
Its Not For Everyone, It Is For Me.
Its Not a Hobby, It's. My Passion,
Its Not For Everyone, It Is For Me.
Re: SYNCING THROTTLEBODYS
you need to adjust the BBS on each side to set the idle balance.
If you have done the TB Balance at 3000rpm for example, and then you adjust the BBS, your 3000rpm balance will be fine but your idle balance will be way off
https://advrider.com/f/resources/
follow that link, scroll down a bit and click on the link / get the pdf for Throttle Body Synching
If you have done the TB Balance at 3000rpm for example, and then you adjust the BBS, your 3000rpm balance will be fine but your idle balance will be way off
https://advrider.com/f/resources/
follow that link, scroll down a bit and click on the link / get the pdf for Throttle Body Synching
-
The Teutonic Tangerine
- Posts: 1649
- Joined: Mon Jan 28, 2008 3:18 pm
- Location: Essex
- Contact:
Re: SYNCING THROTTLEBODYS
PDF not available to non ADV members 
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity
Re: SYNCING THROTTLEBODYS
pm me your e-mail address, later I shall send it to you
(will also see if I can put it up on here some how)
(will also see if I can put it up on here some how)