Page 1 of 2
Boxerpix
Posted: Sun Feb 21, 2016 10:29 pm
by Beamerboy
Don`t know if this is going to work!!!!
I`m TRYING to post my first image.
Followed Steve Parrys instructions, fingers crossed
Rob
Posted: Sun Feb 21, 2016 10:38 pm
by Boxered
What a great looking bike, always my fav BCR colours
Steve
Posted: Sun Feb 21, 2016 10:59 pm
by Beamerboy
Hi Steve,
Bought it last March, 2 owners from new, single spark with 33 thousand miles on it.
It`s meant to be ridden, not for showing in the living room!!!!!!
It`s not mint but in very good condition for nearly 14 years old.
Rob
Posted: Mon Feb 22, 2016 11:01 am
by slparry
looking great Rob!
Posted: Mon Feb 22, 2016 6:57 pm
by Beamerboy
Yes not bad Steve.
I should have said 30,0000 miles.
What`s 3,000 between friends.
Thanks for the tip regarding sending pics.
It works!!!!!!!!!
Rob
Posted: Mon Feb 22, 2016 7:04 pm
by Blackal
Looks like an ultra-tidy bike with the good options added.........
If it were me - I'd swap the dark tank pads for clear. The bike has sufficient graphics in my opinion.
Other than red rim-tape, which even the most vociferous of detractors - would secretly admit......... is QUALITY
Al
Posted: Mon Feb 22, 2016 8:25 pm
by Mitch1100
Very noice..not as fast as the RWB Replika though
Posted: Mon Feb 22, 2016 8:55 pm
by Beamerboy
Hi Al,
You`re quite right. I too would like to get rid of the dark tank pads but not sure how to and don`t want to damaged the paint work underneath.
Any ideas welcome!!!!
Ps Iv`e had rim tape on other bikes before but in blue. Maybe that's the reason the bike couldn`t go faster
Posted: Mon Feb 22, 2016 9:05 pm
by Beamerboy
Hi Mitch,
Not sure the RWB Replika is quicker actually!!
Anyway if you mix the three colours together RWB you`d probably get a pink bike going at plus 100 MPH
Just a thought
Posted: Mon Feb 22, 2016 9:06 pm
by andy griff
Most sticky things can be removed by using a hair dryer to warm the sticker and gently peel off.
Trick is go slow and be gentle
Posted: Mon Feb 22, 2016 9:07 pm
by Blackal
Beamerboy wrote:Hi Mitch,
Not sure the RWB Replika is quicker actually!!
It just
IS - okay?
Al
Posted: Mon Feb 22, 2016 9:18 pm
by Beamerboy
Hi Andy,
That was my first thought
Posted: Tue Feb 23, 2016 4:55 am
by dave the german
Beamerboy wrote:Hi Andy,
That was my first thought
I've got some sort of solvent for removing adhesive if there's any left on - I'll let you know what it is when I've read the label on the tin!!
Posted: Tue Feb 23, 2016 10:04 am
by slparry
Blackal wrote:Beamerboy wrote:Hi Mitch,
Not sure the RWB Replika is quicker actually!!
It just
IS - okay?
Al
Don't listen to them Rob .... the single spark Mamola BCR
IS the quickest, much quicker and rarer than those common RWB tarts
Posted: Tue Feb 23, 2016 6:48 pm
by Beamerboy
Thanks Dave any advice is much appreciated.
And Steve thanks for the back up mate, the RWB are 10 a penny!!!!!!!!
Rob