Ian
Its my first yam
Moderators: slparry, Gromit, Paul
-
iandunn1100ss
- Posts: 356
- Joined: Mon Aug 16, 2004 9:04 pm
- Location: bristol
Its my first yam
Hi guys picked up my 08 plate red and white r1 last week.What can i say the bike is flapping mad.Spent many hours going through the whole bike with all the panels off as i like things that go this fast to be spot on.It came with many nices bits and i have added a puig screen and many bolts from pro bolt and a r&g rad guard.Here it is.
Ian
Ian
Bmw r1100s 02 frost blue,bmw r1100s 03 blue,Yamaha tmax500 03 silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
-
iandunn1100ss
- Posts: 356
- Joined: Mon Aug 16, 2004 9:04 pm
- Location: bristol
Oe ti front pipes to retain the exup valve and then de cat and cans.Setup with pc3 and bmc filter at cresent on the dyno at 172.5 bhp at the wheel and 85lbs of torque. 
Ian
Ian
Bmw r1100s 02 frost blue,bmw r1100s 03 blue,Yamaha tmax500 03 silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
Soiunds good! 
I left mine with the exup/cat in, but added long velocity stacks for midrange.
I think mine was over 175 bhp at the wheel, can't remember the torque figure though.
I had bought a pair of the 6-pot calipers, with the intention of getting the appropriate fork bottoms - but went for the Ohlins forks instead.
They're a bit rapid (rabid?
) eh?
Al
I left mine with the exup/cat in, but added long velocity stacks for midrange.
I think mine was over 175 bhp at the wheel, can't remember the torque figure though.
I had bought a pair of the 6-pot calipers, with the intention of getting the appropriate fork bottoms - but went for the Ohlins forks instead.
They're a bit rapid (rabid?
) eh? Al
If I am ever on life support - Unplug me......
Then plug me back in..........
See if that works .....
Then plug me back in..........
See if that works .....
-
iandunn1100ss
- Posts: 356
- Joined: Mon Aug 16, 2004 9:04 pm
- Location: bristol
Rabid i should co co .The ride home from salisbury where i picked it up from was just unreal.Had sam behind in our leon cupra and in the end she waved me on when shes knew where she was and that was it 
.
Your r1 with the ohlins must by good .Had to take alot of preload off front and back for my tiny weight to work it right but now its spot .
Ian
.Your r1 with the ohlins must by good
.Had to take alot of preload off front and back for my tiny weight to work it right but now its spot .Ian
Bmw r1100s 02 frost blue,bmw r1100s 03 blue,Yamaha tmax500 03 silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
-
iandunn1100ss
- Posts: 356
- Joined: Mon Aug 16, 2004 9:04 pm
- Location: bristol
no just standard wheels with proper paint job on the them,Removing the wheels decals is on my to do list i have some yamaha ones to fit shortly.
Ian
Ian
Bmw r1100s 02 frost blue,bmw r1100s 03 blue,Yamaha tmax500 03 silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver