Posted: Fri Jun 08, 2007 9:35 am
Scotty
The rear cans are mounted on 2 spigots with rubber or silicon sleeves so there is a certian amount of movement.
If you remove the 4 bolts together with any support bar you may have on the Y piece, this should allow the exhast to drop enough to allow you to remove the bolt.
Steve
The rear cans are mounted on 2 spigots with rubber or silicon sleeves so there is a certian amount of movement.
If you remove the 4 bolts together with any support bar you may have on the Y piece, this should allow the exhast to drop enough to allow you to remove the bolt.
Steve