Zach cat replacement

julian · Post by **julian** » Sun Jul 18, 2004 9:37 pm

I put a new gas flowed 'Y' piece on the KTM Duke today and upped the main jet to a 180. It goes like a scalded cat now.

Bloody should do at £300 for the Y

Next thing is to put a 40T sprock on the back vice 38T and we're done.

JK

Darth_1100S · Post by **Darth_1100S** » Tue Jul 20, 2004 1:27 am

Dan is of course right Adam, I did indeed have to cut the up pipe to get the silencers to go over the 2 locating pegss fully. After the intiial fitting the damn thing came off the pegs and was hanging on by a wing and a prayer. I took about an inch off it and have had no problems since.

The daft thing is that I bought mine secondhand from Peter (Herman) and he obviously had no problem either....Strange things these BeeEms

D

boxerpan · Post by **boxerpan** » Tue Jul 20, 2004 7:26 am

Darth_1100S wrote:

The daft thing is that I bought mine secondhand from Peter (Herman) and he obviously had no problem either....Strange things these BeeEms

D

Didn't Peter have his engine moved forward in the frame to get a bit more weight over the front wheel to stop it coming up when doing those drag starts

Lloyd

air_cooled67 · Post by **air_cooled67** » Tue Jul 20, 2004 7:48 am

They do come up second hand from time to time if your lucky. I got mine from the old forumn, hardley used and for a song! Its a great piece of kit but as has been said before, you will want to go and buy some laser end cans as well, I did! Lurverly noise.....