non ABS brake bleeding

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: slparry, Gromit, Paul

johnl
Posts: 127
Joined: Thu Oct 19, 2006 7:50 pm
Location: here and there

non ABS brake bleeding

Post by johnl »

I've had a search but it all seems ABS related. I have a year 2000 without ABS. In order to bleed the brakes is it simply a question of loosening off the bleed nipple and pump the lever/tighten nipple/pump lever etc until new brake fluid can be seen coming through the other end, basically just like my car,

or.....does the servo assistance have any additional say on the matter in affecting what I should do?

ta

John
JoeC
Posts: 540
Joined: Mon May 22, 2006 1:50 pm
Location: The Home of Ferodo

Post by JoeC »

As far I am aware it is just a case of pumping the new fluid through either using a proper bleed tube or loosen your nipple (!), squeeze lever in and then tighten up nipple and so on.
If you are changing the fluid then remove as much as you can from the reservoir, put new fluid in and then do the bleeding bit but remember to keep the fluid topped up and lots of rags under the reservoir just in case.
Same process applies to front & rear brakes.
Always easier to do with 2 people.
No longer a motorcycle owner.
boxerpan
Posts: 2234
Joined: Thu Feb 19, 2004 6:48 pm
Location: waving, not drowning. Warwicks

Re: non ABS brake bleeding

Post by boxerpan »

johnl wrote:I've had a search but it all seems ABS related. I have a year 2000 without ABS. In order to bleed the brakes is it simply a question of loosening off the bleed nipple and pump the lever/tighten nipple/pump lever etc until new brake fluid can be seen coming through the other end, basically just like my car,

or.....does the servo assistance have any additional say on the matter in affecting what I should do?

ta

John
Servo assist didn't rear it's ugly head until a few years after your bike so standard bleeding rules apply
Lloyd

It's not how fast you ride, it's how you ride fast.
Light travels faster than sound. That's why some people appear
bright until you hear them speak.
Archie
Member
Posts: 751
Joined: Thu Sep 16, 2004 9:24 pm
Location: Scotland

Re: non ABS brake bleeding

Post by Archie »

boxerpan wrote: so standard bleeding rules apply
Do mind your language please Lloyd, this is a public forum, and it's before 9pm.
User avatar
gus
Member
Posts: 2418
Joined: Thu Feb 19, 2004 5:10 pm
Location: birmingham

Post by gus »

The language some people use.















its a f*****g disgrace i tell ya!
gus :wink:
johnl
Posts: 127
Joined: Thu Oct 19, 2006 7:50 pm
Location: here and there

Post by johnl »

"No servo assistance" ok, thats cool, the job will be dead easy then :)

so,..... whats the wuurring noise when I turn the ignition on? I always presumed that was the servo's waking up.[/quote]
JoeC
Posts: 540
Joined: Mon May 22, 2006 1:50 pm
Location: The Home of Ferodo

Post by JoeC »

Fuel pump is the whirring noise.
No longer a motorcycle owner.
johnl
Posts: 127
Joined: Thu Oct 19, 2006 7:50 pm
Location: here and there

Post by johnl »

fuel pump was my second guess :wink:
Steptoe
Posts: 274
Joined: Fri Aug 18, 2006 9:21 pm
Location: South

Post by Steptoe »

If you can't tell what type of brakes you have fitted, are you safe to bleed the brakes :D
Post Reply Previous topicNext topic