Is a paralever front end less inclined to tuck ?

Pull up a chair - let's talk Boxerbollox

Moderators: Gromit, Paul, slparry

kfrogzx7
Posts: 254
Joined: Tue Jul 15, 2014 9:25 pm
Location: Suffolk

Is a paralever front end less inclined to tuck ?

Postby kfrogzx7 » Fri Apr 13, 2018 7:17 pm

I've just done my 11s servoectomy and briefly tested my "new" brakes up and down my damp and dirty concrete yard, I've never before ridden a paralever boxer without abs.
I was locking the front up, at not much more than walking pace admittedly, and my first impressions were that she didn't feel as though she was going to tuck the front and go down as all my previous tele-forked bikes would have done I'm sure.
I always swore by abs once I'd experienced it and only decided on a servoectomy because my S is now my exclusively sunny Sunday / track day bike and won't be tackling any more dirty, wet and cold Scottish mountain roads :)
The only times I've come off in well over 40 yrs of biking ( twice, without any serious consequences ) are front end lock ups, I hate them because you're nearly always a passenger en route to the tarmac. You can catch the back, only Marc Marques can catch the front.
I'd love to think that a paralever equiped bike is safer in this respect, is it though ?
Simon.
K100rs, R1100s, R1150rs, R1200st, K1300s

SP250
Posts: 983
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Is a paralever front end less inclined to tuck ?

Postby SP250 » Fri Apr 13, 2018 8:03 pm

You will probably only have a couple of people qualified to answer that question -
Those who have smoked the front tyre on a track and got away with it.
So you may be waiting a long time for an answer..............
John M

kfrogzx7
Posts: 254
Joined: Tue Jul 15, 2014 9:25 pm
Location: Suffolk

Re: Is a paralever front end less inclined to tuck ?

Postby kfrogzx7 » Fri Apr 13, 2018 8:18 pm

:D
Yes, but the fewer people there are who've any experience of it I suppose might back up my first impressions ?
Anyway, I'm planning a proper test of my "new" brakes on dry roads tomorrow, but that won't include a test of the tendency to tuck I hope !!
Simon.
K100rs, R1100s, R1150rs, R1200st, K1300s

boxerscott
Posts: 3718
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Re: Is a paralever front end less inclined to tuck ?

Postby boxerscott » Fri Apr 13, 2018 9:35 pm

I think you are confusing your telelever with your paralever. The paralever is the rear end transmission and wheel support. I reckon you have to tie the beast in knots to get the paralever to tuck the front. Your biggest enemy for tucking the front is when avoiding all the feckin potholes!

I have folded the front once on a Boxer, it was on a track and I was riding like a Knob.

The front end is very stable plush handling even when things get a wee bumpy under rubber.

relax, enjoy for what it is :)

Chris
Last edited by boxerscott on Fri Apr 13, 2018 9:47 pm, edited 1 time in total.
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.

boxerscott
Posts: 3718
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Re: Is a paralever front end less inclined to tuck ?

Postby boxerscott » Fri Apr 13, 2018 9:43 pm

I think you are confusing your telelever with your paralever. The paralever is the rear end transmission and wheel support. I reckon you have to tie the beast in knots to get the paralever to tuck the front. Your biggest enemy for tucking the front is when avoiding all the feckin potholes!

I have folded the front once on a Boxer, it was on a track and I was riding like a Knob.

The front end is very stable plush handling even when things get a wee bumpy under rubber.

relax, enjoy for what it is :)

Chris

Edit. The post title was confusing the issue you refer to re brakes, I can only imagine that whilst you were riding your abs models you were quite used to relying on your abs assistance under heavy braking! Don`t relax then, just take it easy! :wink:
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.

User avatar
Boxered
Route Master
Posts: 3079
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Re: Is a paralever front end less inclined to tuck ?

Postby Boxered » Fri Apr 13, 2018 10:07 pm

boxerscott wrote:
The front end is very stable plush handling even when things get a wee bumpy under rubber.

relax, enjoy for what it is :)

Chris


I can confirm that a non ABS R1100S Boxercup remains very stable under EXTREME hard braking, even on a very worn Kielder forest road
as I witnessed a couple of years ago while following Boxerscott riding like a BoxerKnob :shock:

HTH

Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware

kfrogzx7
Posts: 254
Joined: Tue Jul 15, 2014 9:25 pm
Location: Suffolk

Re: Is a paralever front end less inclined to tuck ?

Postby kfrogzx7 » Fri Apr 13, 2018 10:10 pm

Oops, very embarrassing, yes of course I meant telelever not para :oops:

I've been riding for a long time, and I can and do always relax and enjoy myself, I'm not a nervous biker seeking reassurance.
Rather it was a technical query about the behaviour of a locked up telelever front end and other peoples experiences and feelings about it.

Chris did your folded front incident seem just like a conventional fork lock up ?

It just seems to me that maybe with less front compression under heavy braking, and therefore less change to the steering geometry, perhaps skidding forwards and not sideways is a tad more likely ?
Simon.
K100rs, R1100s, R1150rs, R1200st, K1300s

SP250
Posts: 983
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Is a paralever front end less inclined to tuck ?

Postby SP250 » Sat Apr 14, 2018 8:21 am

Kfrog

The front of an R1100S is extremely stable and you can out brake SS 600's while they are flapping about with the rear wheel 6" in the air.
The front doesn't tuck in the transition to throttle on power from letting off the brake, nor when laid over on the gas in long sweeping bends.
Where you will have issues is on muscleing it through fast direction changes - its worse than a Ducati for slow steering, hence the mod of a longer GS paralever link to raise the back of the bike to make it steer a bit quicker.
Another potential problem is you can't feel what the front tyre is doing like you can on a conventional forked bike - just trust it though, because it sticks even though you can't feel it as well.
Just a case of getting used to a different feel - if you want to see how good they are, just watch the racers abusing them in a you tube vid of the early 2000's Boxercup racing.
John M

Jeff Highland
Posts: 87
Joined: Thu Jan 12, 2017 10:03 pm

Re: Is a paralever front end less inclined to tuck ?

Postby Jeff Highland » Sat Apr 14, 2018 8:45 pm

Shorter GS paralever not longer

SP250
Posts: 983
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Is a paralever front end less inclined to tuck ?

Postby SP250 » Sun Apr 15, 2018 8:48 pm

Sorry Geoff

You're right shorter link - I was still asleep obviously!
John M

User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Is a paralever front end less inclined to tuck ?

Postby nab 301 » Mon Apr 16, 2018 8:13 pm

kfrogzx7 wrote:Rather it was a technical query about the behaviour of a locked up telelever front end and other peoples experiences and feelings about it.



It just seems to me that maybe with less front compression under heavy braking, and therefore less change to the steering geometry, perhaps skidding forwards and not sideways is a tad more likely ?


I think I mentioned this before but a good while back I was approaching a junction ( faster than I should have been) that I wanted to turn right at on a wet road with my non abs r1100s. Just as I braked I realised that there was a lot of diesel on the road . I sailed past the junction with locked wheels but remained upright . I think the excess speed actually helped me . In general I find that on (wet) corners the rear end of my S lets go before the front.
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

kfrogzx7
Posts: 254
Joined: Tue Jul 15, 2014 9:25 pm
Location: Suffolk

Re: Is a paralever front end less inclined to tuck ?

Postby kfrogzx7 » Tue Apr 17, 2018 9:51 am

nab 301 wrote:
kfrogzx7 wrote:Rather it was a technical query about the behaviour of a locked up telelever front end and other peoples experiences and feelings about it.



It just seems to me that maybe with less front compression under heavy braking, and therefore less change to the steering geometry, perhaps skidding forwards and not sideways is a tad more likely ?


I think I mentioned this before but a good while back I was approaching a junction ( faster than I should have been) that I wanted to turn right at on a wet road with my non abs r1100s. Just as I braked I realised that there was a lot of diesel on the road . I sailed past the junction with locked wheels but remained upright . I think the excess speed actually helped me . In general I find that on (wet) corners the rear end of my S lets go before the front.


That's amazing Nigel, you were lucky to be on the right bike !! It seems to back up my feeling of what a locked up telelever might do.
Simon.
K100rs, R1100s, R1150rs, R1200st, K1300s

User avatar
The Teutonic Tangerine
Posts: 1646
Joined: Mon Jan 28, 2008 3:18 pm
Location: Essex
Contact:

Re: Is a paralever front end less inclined to tuck ?

Postby The Teutonic Tangerine » Tue Apr 17, 2018 11:03 am

I know Telelver does not" Dive" under braking but the spring does compress a bit.

If you look at the geometry of how the suspension works this slight compression has the duel affects of:

A) lengthening the wheelbase
B) increasing the steering head angle (making is lazier)

Both of which should reduce the propensity to "Tuck"

IMHO
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity

User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Is a paralever front end less inclined to tuck ?

Postby nab 301 » Tue Apr 17, 2018 6:30 pm

Our very own" Gromit" posted something on this on pelican forum ages ago .
http://forums.pelicanparts.com/bmw-r110 ... metry.html
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

boxerscott
Posts: 3718
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Re: Is a paralever front end less inclined to tuck ?

Postby boxerscott » Wed Apr 18, 2018 12:26 am

kfrogzx7 wrote:Oops, very embarrassing, yes of course I meant telelever not para :oops:

I've been riding for a long time, and I can and do always relax and enjoy myself, I'm not a nervous biker seeking reassurance.
Rather it was a technical query about the behaviour of a locked up telelever front end and other peoples experiences and feelings about it.

Chris did your folded front incident seem just like a conventional fork lock up ?

It just seems to me that maybe with less front compression under heavy braking, and therefore less change to the steering geometry, perhaps skidding forwards and not sideways is a tad more likely ?
No I did not lock up, I can do this... Too fast in, dare not use too much brake, ran wide, more lean, less track , more lean, rhs head skittering lifted front, gravel , sky, gravel, sky . First session on a track day, thankfully it was not a warm up lap! (although all signs were there that doom was impending) That said they have all crashed on that bend including Rossi,!

Perhaps a bit of front may have saved the day? Who will know, I do not wish to explore the frontiers of Knobdom anymore :)
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.


Return to “Boxerbanter”

Who is online

Users browsing this forum: No registered users and 41 guests