To comply with forum rules I'm putting price here for the major components. The photos are how the bike is standing right now.
Engine - bare unit with TB's and injectors, headers (removed so you know the studs are intact, all the exhaust, airbox, ECU, pump, tank. You CAN hear this running in the bike currently, if I get time I'll make a video. Doesn't include the alternator, the starter or the clutch. There's some marks on the RH rocker cover but it is intact and holds oil. £350 all of it.
Gearbox £150 to be revised if the splines are poorly when it's removed.
Final drive (ABS sensor type) £70 NOTE: not a direct fit-up to the paralever you will have to strip it and swap the bits over. I converted it to ball bearing pivots but I never got round to making the two large nuts so it's unfinished.
Both wheels with good disks but barely legal tyres these are the wider wheels £180
Front braking system complete £25 has had absectomy.
RH engine protector as seen in the pic £15
Illemberger carbon hugger no cracks but not the best example comes with the two extension nuts to mount £25
Home made centre stand with pivot bushes and spring £35 has more lift for the yellow shock bikes
Clocks £60 come with working time clock.
Full set of locks with one genuine key and one blank key for cutting £70
All items are collect from Gravesend or you pay shipping. Hermes for up to their 15kg limit or you arrange courier for the bigger stuff. Opinions/questions welcome. Want photos of specific items please ask. If you want any thing not listed please mention and I'll put a price to it. Please put your interest IN THIS THREAD to avoid confusion or disappointment.
Cash please for collected stuff, Paypal gift for postal items. Will consider bank transfer.
Pete.
- 1100sbreaking.jpg (147.97 KiB) Viewed 11381 times
- 1100sclocks.jpg (122.09 KiB) Viewed 11381 times
