USD forks

PRIVATE sales only please.

Moderators: Gromit, Paul, slparry

User avatar
stevesilver
Posts: 221
Joined: Sun Sep 13, 2015 6:18 pm
Location: Bromley

USD forks

Postby stevesilver » Tue Feb 21, 2017 5:25 pm

http://www.ebay.co.uk/itm/142285896778?ul_noapp=true

Is this the earliest bike ever to come with USD forks?

User avatar
The Teutonic Tangerine
Posts: 1646
Joined: Mon Jan 28, 2008 3:18 pm
Location: Essex
Contact:

Re: USD forks

Postby The Teutonic Tangerine » Wed Feb 22, 2017 9:19 am

Not sure of the very first but in 1974 I had a 1960 Phillips Panda (can't find a picture but it was identical to the 1960 Norman Nippy) Pictured here as you see USD forks but no rear springing except the saddle. :bounce:

Equipmnt: Front and rear full width drum brakes, parcel carrier, Front main and dipped headlamp and rear light (no brake light) hooter and kill switch (no ignition key) and no speedo.

That's about it

http://www.classicmopedspares.com/media ... 060955.jpg
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity

User avatar
stevesilver
Posts: 221
Joined: Sun Sep 13, 2015 6:18 pm
Location: Bromley

Re: USD forks

Postby stevesilver » Wed Feb 22, 2017 6:24 pm

The Teutonic Tangerine wrote:Not sure of the very first but in 1974 I had a 1960 Phillips Panda (can't find a picture but it was identical to the 1960 Norman Nippy) Pictured here as you see USD forks but no rear springing except the saddle. :bounce:

Equipmnt: Front and rear full width drum brakes, parcel carrier, Front main and dipped headlamp and rear light (no brake light) hooter and kill switch (no ignition key) and no speedo.

That's about it

http://www.classicmopedspares.com/media ... 060955.jpg


Wow awesum forks, did they actually move? and bit on the thin side methinks :lol:

User avatar
The Teutonic Tangerine
Posts: 1646
Joined: Mon Jan 28, 2008 3:18 pm
Location: Essex
Contact:

Re: USD forks

Postby The Teutonic Tangerine » Fri Mar 03, 2017 9:22 am

stevesilver wrote:
The Teutonic Tangerine wrote:Not sure of the very first but in 1974 I had a 1960 Phillips Panda (can't find a picture but it was identical to the 1960 Norman Nippy) Pictured here as you see USD forks but no rear springing except the saddle. :bounce:

Equipmnt: Front and rear full width drum brakes, parcel carrier, Front main and dipped headlamp and rear light (no brake light) hooter and kill switch (no ignition key) and no speedo.

That's about it

http://www.classicmopedspares.com/media ... 060955.jpg


Wow awesum forks, did they actually move? and bit on the thin side methinks :lol:



Yes they did move but only about two inches of travel and no damping - I think it was just enough to make holding the handlebars a bit more comfortable.. the larger than bicycle tyres helped the ride quality. It was just like a heavily built bicycle - two chains - one for pedal power one for engine transmission - going up long steep hills you had to assist the engine by pedalling.

The Metal pouches below the saddle (one in each side) were for spare spark plug, plug spanner, puncture repair kit (there were also lugs for a bicycle pump somewhere).

It would do about 25mpoh on the flat and about 100mpg on 25:1 two stroke mixture.
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity


Return to “Bits'n'bobs for sale”

Who is online

Users browsing this forum: No registered users and 81 guests