Winter project

[Boxermed69]

Very nice work Rich. The front of your engine looks as good as new. Also like the contrasting centre fairing piece - really suits the bike

Mike

[RSBowling]

Thanks for the kind comments guys, much appreciated. Maybe try the wheel cleaner trick I mentioned, gets it to the stage where you only need autosol then.
Thanks glad you said about the front fairing, was forever looking at it thinking, 'this should be black' pleased with it, I think it lifts it a bit.
Cheers,
Rich

[Herb]

Just needs black wheels to finish it off!

[slparry]

Thanks for the kind comments guys, much appreciated. Maybe try the wheel cleaner trick I mentioned, gets it to the stage where you only need autosol then.
Thanks glad you said about the front fairing, was forever looking at it thinking, 'this should be black' pleased with it, I think it lifts it a bit.
Cheers,
Rich

If you do use wheel cleaner and cloth strips, which works a treat, keep it away from the studs as it'll accelerate corrosion on the studs

[dave the german]

Rich I've got a Twinmax to balance throttle bodies if you need it also the cut away socket to do swingarm bearings

[RSBowling]

Hi,
Not too keen on black wheels to be honest, but I'm yet too see one done with a mandarin. Yes I'll keep well away Steve! After the effort gone into careful removal, I'll treat them with upmost caution. Have copper slipped the threads etc, and I plan to remove them a couple of times a year.
Thanks Dave, very kind of you to offer. I'll see how I get on with the cheap kit I bought off eBay first. Reason for checking them is that towards the end of last year I felt a tad more vibration at higher revs, and seeing as thought I've done my other mods, be daft not to get the sync spot on.
I've got a few more jobs if like to do, but not necessarily before the season starts, will put them out there Incase anyone has any advice, or even the better, the parts I would like! As follows-
Laser end cans
Make seat more comfortable
Lennies induct
Adjustable torque arm (more for looks as I like the geometry I have now, uber stable!)
Braided brake lines (quiet happy with standard to be honest)

Cheers,
Rich

[RSBowling]

Update,
Saw a carbon 3 piece belly pan on eBay, and decided to buy it (already bought and sold on a ricambi Weiss one!)
But I thought this one would look less 'gopping' and do a great job of protecting my engine paint.
Looks really good, albeit pricey.
Also been talking to the guys at saddle craft South Shields, about gel padding my seat. Would cost £115 for gel pad using original vinyl, and £165 for gel and new vinyl. Going to see if they have a grip pier vinyl as I find the original a bit slippy. And any riding slow or amongst traffic it feels like I'm sitting on a church pew!
Cheers,
Rich

image.jpeg (156.31 KiB) Viewed 5687 times

image.jpeg (166.59 KiB) Viewed 5687 times

[ianbcr]

Nice job you've done there Rich, About protecting your engine paint have you thought of a fender extender or a carbon engine cover.

[fontana]

Not that it's going to be compatible with a belly pan, but I think these are great.
Not the prettiest accessory, but very effective.

http://www.cymarcbikeparts.co.uk/bmw-r1 ... r-53-p.asp

[dave the german]

I've found the pipes stay clean for some time - far longer than the 12s anyway - just started it up and they started to turn brown!!

I digress - for any metal polishing equipment try "The Polishing Shop" they're really helpful and give advice freely - the polishing kits cost tho

[RSBowling]

Hi guys,
Ian, It's not very clear on the photos but I have already fitted a fender extender, but I'm curious about a carbon engine cover, never seen one!
Yes Fontana, that would protect the engine well, especially if a grenade is rolled in front of you! Good cost effective way though, painted up and maybe a decal would look ok.
Well funny you should recommend them Dave, I actually used their kit to do mine whilst off the bike, knowledgeable and very helpful people.
Have you, or do you know anyone who has used saddle craft Dave?
Cheers,
Rich

[RSBowling]

Does anyone know if they did a carbon head cover for these single sparks? If so where to get them?
Thanks,
Rich

[McBoxer]

Does anyone know if they did a carbon head cover for these single sparks? If so where to get them?
Thanks,
Rich

Yep, the Mamola rep had them as standard, but they're like rocking horse poo on the used market and cost the same as the moon.
On a stick.
Copy parts are also difficult to come by these days as most suppliers have stopped making them. I spent ages looking for some when I had mine, but I gave up in the end!

[dave the german]

[Have you, or do you know anyone who has used saddle craft Dave?
Cheers,
Rich[/quote]

Never used them or know anyone who has. The filling station at Plawsworth has an upholsterer in the building to the left of the pumps - Seems to have a good reputation

[Humbug]

Used CBTS in Newark Notts for my covers, choice of materials and colours £80 for both seats with new softer foam.

IMG_2821.JPG (97.45 KiB) Viewed 5644 times