Tentative Sale - R1200S
Moderators: Gromit, Paul, slparry
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
Tentative Sale - R1200S
Having just been offered a really good deal on a RnineT I am now contemplating selling my R1200S . Wrong time of year I know but if someone is after a really nice R1200S with all of the farkles then this is it , Custom Black and Silver paintwork , Corbin Seat , Ilmberger Hugger and Belly Pan , Carbon Fibre Single Seat Cowel and head covers , Full Akrapovic straight through system , Power commander with quickshift , HP air filter , brand new PR4 tyres , just been fully serviced , MOT until July 2017 . Bike has the Sports pack with wider rear wheel , full Ohlins suspension which has just been serviced by Kais , ABS , heated grips , LED headlight Upgrade . Rear LED indicators with R&G tail tidy . Bike is absolutely immaculate , I do not think you will find a better one . Full main dealer service history until 13K miles then serviced by myself from then with all receipts for genuine BMW service items . Mileage is now 15K . BMW Alarm fitted . Also included is a pair of unused Sports panniers and the required fitting rails and kit . I have never used these and the fitting kit is still sealed in its bag . I also have a genuine BMW tank Bag . Bike is currently on a private plate which will be removed and original plate put on . All standard parts also included - seat , exhaust , rear number plate holder , rear footpegs . i also have a set of Helibars .
I'm looking for £5450 with everything included . If someone wants the bike back in standard form I'm open to negotiations .
I'm looking for £5450 with everything included . If someone wants the bike back in standard form I'm open to negotiations .
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
Topcat wrote:That is very nice indeed, good luck with the sale.
In the unlikely case of it going back to standard, could I be cheeky and have first dibs on the Corbin Seat, full Akrapovic, the Power commander and quickshift.
Thanks
Dave
Fellow Forum member Dave the German has first dibs on all farkles but you are now in line for 2nd Dibs
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
-
- Posts: 190
- Joined: Mon May 18, 2015 4:02 pm
- Location: Cumbria England
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
Further Information
Factory production date was 28/04/2006 and it was first registered 03/06/2006
Other extras / points of note are :
Carbon Fibre Top Yoke Cover , SS Oil Cooler Grill. Tinted Headlight Cover , front mudguard fender extender , tinted genuine BMW screen , carbon fibre rear tension strut cover , SS pivot covers . Genuine HP machined clutch and brake levers
Its just had a set of brand new genuine BMW heated grips fitted
I also fitted a new steering damper and top and bottom ball joints , as I felt it low speed handling was not 100% originally , enough to say it handles beautifully now ! Also put in new wheel bearings whilst I was on .
No corrosion on front engine cover . All of the bolts are SS Torx head with Duralac anti corrosive jointing compound used
Other extras / points of note are :
Carbon Fibre Top Yoke Cover , SS Oil Cooler Grill. Tinted Headlight Cover , front mudguard fender extender , tinted genuine BMW screen , carbon fibre rear tension strut cover , SS pivot covers . Genuine HP machined clutch and brake levers
Its just had a set of brand new genuine BMW heated grips fitted
I also fitted a new steering damper and top and bottom ball joints , as I felt it low speed handling was not 100% originally , enough to say it handles beautifully now ! Also put in new wheel bearings whilst I was on .
No corrosion on front engine cover . All of the bolts are SS Torx head with Duralac anti corrosive jointing compound used
-
- Member
- Posts: 3625
- Joined: Tue Nov 01, 2005 4:35 am
- Location: North East
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
-
- Member
- Posts: 3625
- Joined: Tue Nov 01, 2005 4:35 am
- Location: North East
- nicholsonj2252
- Posts: 139
- Joined: Thu Nov 07, 2013 8:46 pm
- Location: Consett
Have been asked for some pictures of front engine casing , drive hub , front of belly pan , front mudguard so here goes....
Engine casing from a short while back when I changed the alternator drive belt , shiny parts are where I applied ACF50 anti corrosive grease
Oh and one of the bikes rear end
and final drive...
Engine casing from a short while back when I changed the alternator drive belt , shiny parts are where I applied ACF50 anti corrosive grease
Oh and one of the bikes rear end
and final drive...
Return to “Bits'n'bobs for sale”
Who is online
Users browsing this forum: No registered users and 111 guests