R1200S rear shock mount question

[maineroads]

I've been servicing my new to me (second time around) R1200S and have found a slight issue.
I have the rear shock off and have noticed the upper frame shock mount
has a larger diameter mount hole on one side. The bolt that was in there is not shouldered on one side, so either I have the wrong bolt or for some reason there is supposed to be a bushing in there.
I've looked at the parts fiche and it doesn't specify anything other than a m10 x1.25x55. It also
doesn't show a bushing?
Ideas??
Thanks Steve

[dave the german]

Is it an Ohlins shock? I've just had mine serviced and certain there was a bush in either side - it was a tight fit (please no wim away jokes!!!) and I couldn't push them out. If it's an Ohlins shock you should be able to get the part. I'll have a good look at mine later

[maineroads]

Thanks for the reply. It was my inattention during removal. Evidently the allen head bolt fits neatly into the larger side of the shock mount tab! guess I need to slow down a bit.
Cheers, Steve

[dave the german]

Sorted