Boxerpix

Beamerboy · Post by **Beamerboy** » Sun Feb 21, 2016 10:29 pm

Don`t know if this is going to work!!!!

I`m TRYING to post my first image.

Followed Steve Parrys instructions, fingers crossed

Rob

Boxered · Post by **Boxered** » Sun Feb 21, 2016 10:38 pm

What a great looking bike, always my fav BCR colours

Steve

Beamerboy · Post by **Beamerboy** » Sun Feb 21, 2016 10:59 pm

Hi Steve,

Bought it last March, 2 owners from new, single spark with 33 thousand miles on it.

It`s meant to be ridden, not for showing in the living room!!!!!!

It`s not mint but in very good condition for nearly 14 years old.

Rob

slparry · Post by **slparry** » Mon Feb 22, 2016 11:01 am

looking great Rob!

Beamerboy · Post by **Beamerboy** » Mon Feb 22, 2016 6:57 pm

Yes not bad Steve.

I should have said 30,0000 miles.

What`s 3,000 between friends.

Thanks for the tip regarding sending pics.

It works!!!!!!!!!

Rob

Blackal · Post by **Blackal** » Mon Feb 22, 2016 7:04 pm

Looks like an ultra-tidy bike with the good options added.........

If it were me - I'd swap the dark tank pads for clear. The bike has sufficient graphics in my opinion.

Other than red rim-tape, which even the most vociferous of detractors - would secretly admit......... is QUALITY

Al

Mitch1100 · Post by **Mitch1100** » Mon Feb 22, 2016 8:25 pm

Very noice..not as fast as the RWB Replika though

Beamerboy · Post by **Beamerboy** » Mon Feb 22, 2016 8:55 pm

Hi Al,

You`re quite right. I too would like to get rid of the dark tank pads but not sure how to and don`t want to damaged the paint work underneath.

Any ideas welcome!!!!

Ps Iv`e had rim tape on other bikes before but in blue. Maybe that's the reason the bike couldn`t go faster

Beamerboy · Post by **Beamerboy** » Mon Feb 22, 2016 9:05 pm

Hi Mitch,

Not sure the RWB Replika is quicker actually!!

Anyway if you mix the three colours together RWB you`d probably get a pink bike going at plus 100 MPH

Just a thought

andy griff · Post by **andy griff** » Mon Feb 22, 2016 9:06 pm

Most sticky things can be removed by using a hair dryer to warm the sticker and gently peel off.

Trick is go slow and be gentle

Blackal · Post by **Blackal** » Mon Feb 22, 2016 9:07 pm

Beamerboy wrote:Hi Mitch,

Not sure the RWB Replika is quicker actually!!

It just IS - okay?

Al

Beamerboy · Post by **Beamerboy** » Mon Feb 22, 2016 9:18 pm

Hi Andy,

That was my first thought

dave the german · Post by **dave the german** » Tue Feb 23, 2016 4:55 am

Beamerboy wrote:Hi Andy,

That was my first thought

I've got some sort of solvent for removing adhesive if there's any left on - I'll let you know what it is when I've read the label on the tin!!

slparry · Post by **slparry** » Tue Feb 23, 2016 10:04 am

Blackal wrote:
Beamerboy wrote:Hi Mitch,

Not sure the RWB Replika is quicker actually!!

It just IS - okay?

Al

Don't listen to them Rob .... the single spark Mamola BCR IS the quickest, much quicker and rarer than those common RWB tarts

Beamerboy · Post by **Beamerboy** » Tue Feb 23, 2016 6:48 pm

Thanks Dave any advice is much appreciated.

And Steve thanks for the back up mate, the RWB are 10 a penny!!!!!!!!

Rob