WTB........R1200S Hattech Rack

Droptarotter · Postby **Droptarotter** » Thu Aug 20, 2015 4:54 pm

I'm looking for an R1200S Hattech rack.

Thank you.

Droptarotter · Postby **Droptarotter** » Wed Oct 28, 2015 8:14 pm

I'm going to try this again as the only response I got was from a scammer!

Cheers

GerryB · Postby **GerryB** » Thu Oct 29, 2015 7:47 am

A scammer on here ?

Hope you reported him to admin .

They can block the scammers IP address , then he can go scam some where else .

Droptarotter · Postby **Droptarotter** » Thu Oct 29, 2015 4:42 pm

He contacted me through the Pelican forum.

This guy sent me some photo's of the rack...had me going for a little bit, but the tip off was only using Western Union and sending the funds to his sisters place here;

Full Names: Mamie Brant
Address: 205 Preakness Dr, Hinesville, GA 31313, USA.

I'm just waiting for a prepaid letter from someone so I can send her up to 50lbs of used tire material.

Here is the bunt's email if anyone is interested in sending him loads of junk.......

dleslie483@gmail.com

Droptarotter · Postby **Droptarotter** » Thu Dec 03, 2015 5:22 pm

I emailed Hattech last month and they finally replied to me.............

They are going to make another batch of these racks.

Get'em while they are hot..........

http://hattech.de/shop/bmw/r-modelle/bm ... ack-detail

Cheers

Blackal · Postby **Blackal** » Thu Dec 03, 2015 5:45 pm

There are plenty of pillion plates available (if you search e-bay), that can be bolted (with spacers made from Stainless hyd tubing) to pillion seats............

As long as you have a pillion seat you are prepared to drill holes in :shock:

I bought an R-1 pillion pad, complete with GIVI plate and neat top-box. Looks are a bit of an acquired taste - but great for touring or a weekend away.

Al

Herb · Postby **Herb** » Thu Dec 03, 2015 6:09 pm

£170, seems like an OK price. Thinking.....

Boxermed69 · Postby **Boxermed69** » Thu Dec 03, 2015 9:45 pm

Droptarotter wrote:I emailed Hattech last month and they finally replied to me.............

They are going to make another batch of these racks.

Get'em while they are hot..........

http://hattech.de/shop/bmw/r-modelle/bm ... ack-detail

Cheers

Hmmm, so is there a specific box or semi-rigid bag that clips to this plate?

Mike :?:

Droptarotter · Postby **Droptarotter** » Thu Dec 03, 2015 10:43 pm

I'm planning on using one of my Kreiga bags....US10 or US20.

Cheers

Mitch1100 · Postby **Mitch1100** » Thu Dec 03, 2015 10:59 pm

I use the Kriega 10 on my Bagster cover, perfect for wet weather pants, wallet, camera etc...found the Bagster bag a bit too big, for moving around freely.

[

Untitled by Phil Mitchell, on Flickr][/img][

IMG_4780 by Phil Mitchell, on Flickr][/img]

Blackal · Postby **Blackal** » Fri Dec 04, 2015 5:23 am

Boxermed69 wrote:
Hmmm, so is there a specific box or semi-rigid bag that clips to this plate?

Mike

I'm a fan of BagsConnection tail-packs.

Dependent upon the profile of the rack - you can either go for a narrow-ish pack, or the one which extends down the sides slightly.

Al

Boxermed69 · Postby **Boxermed69** » Fri Dec 04, 2015 6:18 pm

I see. So it's a case of pick yer poison. Cheers. The BagsConnection jobs do look good. I suppose you could just strap one onto the pillion seat rather than go to the expense of a luggage plate?

Mike

Blackal · Postby **Blackal** » Fri Dec 04, 2015 6:39 pm

A lot of bags, if there are securing slots on a plate - won't need the straps down onto pillion pegs etc - which invariably rub bodywork no matter how much gaffer tape and grip-fabric you use.

Al

Boxermed69 · Postby **Boxermed69** » Sat Dec 05, 2015 9:38 pm

True enough.

Mike

Blackal · Postby **Blackal** » Mon Dec 07, 2015 11:35 pm

This is quite a good tailpack, quite neat. £74.

http://www.bs-motoparts.com/en/Default. ... wwodo0AKFA

www.boxertrix.com

WTB........R1200S Hattech Rack

WTB........R1200S Hattech Rack

Who is online