Make your old nuts like new!

As it says; what you've done to your bike and how it helped make it better.

Moderators: Gromit, Paul, slparry

Post Reply
Copper
Posts: 84
Joined: Thu Dec 06, 2012 8:41 pm
Location: Bristol

Make your old nuts like new!

Postby Copper » Sun Apr 07, 2013 4:56 pm

Hi,

Had my bike in bits last week and was going to replace the standard rusty bolts with stainless, however, as stainless torx fasteners weren't available locally and I was in a hurry I bought a spray paint called ZG90. I soaked the old bolts in Phosphoric acid (Wonder Wheels is the same stuff) which removed the rust (and any remaining (zinc?) plating). Then I stuck them upright by pushing them into a cardboard box, gave them a good spray the balanced them on end and finished off spraying them.

All the bolts look like new now!

Jon
Top
User avatar
tanneman
Member
Posts: 1203
Joined: Wed Mar 04, 2009 8:26 pm
Location: Terra Firma

Postby tanneman » Sun Apr 07, 2013 6:49 pm

Image
'Let me check my concernometer.'
Top
Copper
Posts: 84
Joined: Thu Dec 06, 2012 8:41 pm
Location: Bristol

Postby Copper » Sun Apr 07, 2013 8:25 pm

Sorry way to busy for the convoluted method of uploading pictures to this site you'll just have to take my word for it and use your imagination.

Jon
Top
User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Postby Blackal » Mon Apr 08, 2013 4:02 am

Didn't someone else on here - post a photo his nuts poking through a sheet of cardboard? :shock:

Might have been Dai or Nick.............

Al :)
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works ..... :?
Top
McBoxer
Member
Posts: 488
Joined: Wed Jul 11, 2012 2:53 pm
Location: West Midlands

Postby McBoxer » Mon Apr 08, 2013 9:13 am

Blackal wrote:Didn't someone else on here - post a photo his nuts poking through a sheet of cardboard? :shock:

Might have been Dai or Nick.............

Al :)


I posted something similar a while back. Not on here, but on one of those 'specialist' websites. I'm surprised you saw it...........

Took me ages to get the bloody paint off, mind :lol:
Big Scottish Al
____________
1982 BMW R65LS
1̶9̶9̶9̶ ̶B̶M̶W̶ ̶R̶1̶1̶0̶0̶S̶
2004 BMW R1150R Rockster 80 Jahre
Top
conkerman
Posts: 500
Joined: Sun Mar 24, 2013 12:10 pm
Location: He's behind you. Oxon.

Postby conkerman » Mon Apr 08, 2013 9:44 am

Not interested unless there is marmite and a spaniel involved!
Top
User avatar
Dai wiskers
Member
Posts: 1262
Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly

Postby Dai wiskers » Mon Apr 08, 2013 1:27 pm

Blackal wrote:Didn't someone else on here - post a photo his nuts poking through a sheet of cardboard? :shock:

Might have been Dai or Nick.............

Al :)


Don't think it was me' but it's a cracking way to keep your casing screws in order when doing a rebuild
My bike shines when it rains!!!!!!!!!!!!!!!!!

Dyslexic Dai


Steptoe
http://www.gsshop.biz/


Dan Cata
http://boxer-upgrades.webs.com/


Lennie
http://www.boxer-performance.com/index.html
Top
User avatar
South_Oz
Posts: 69
Joined: Fri Nov 02, 2012 11:52 pm

Postby South_Oz » Mon Apr 08, 2013 11:23 pm

I repainted an RZ Yamaha recently and used the same method. (with pics)

Image

Dave
99 R11s Pov. Spec.
92 RGV250 Race Spec. Australian Land Speed Record Holder MPS/G 250 131 MPH http://www.dlra.org.au/index.htm
85 RZ250 Yamaha Std.
85 RZ250 Yamaha Spares.
84 RZ250 Yamaha Banshee 350 top end.
84 RZ250 Yamaha Rebuilding for sale.
Top
User avatar
Nookiebear
Posts: 128
Joined: Thu Nov 08, 2012 9:04 pm
Location: Outer London

Postby Nookiebear » Tue Apr 09, 2013 7:38 am

conkerman wrote:Not interested unless there is marmite and a spaniel involved!


I tried the marmite and staffie option, but found crunchy peanut butter worked better and the wife preferred the taste as well. :D
2001 R1100S ABS

George the dog (staffie)
Top
Copper
Posts: 84
Joined: Thu Dec 06, 2012 8:41 pm
Location: Bristol

Postby Copper » Tue Apr 09, 2013 4:21 pm

Hi,

Yes thats pretty much what mine looked like, thanks.

And I thought I'd invented the cardboard box method!

The guts at Motorworx have said stainless on the calipers is a BAD idea so will be using the same method to restore the bolts on those when I get around to it.

Jon
Top
User avatar
Gromit
Posts: 5702
Joined: Mon Feb 16, 2004 8:33 pm
Location: Lincs, me duck

Postby Gromit » Tue Apr 09, 2013 8:35 pm

Copper wrote:
The guts at Motorworx have said stainless on the calipers is a BAD idea so will be using the same method to restore the bolts on those when I get around to it.

Jon


Interesting, considering they sell (or did sell as I bought one) a kit which contains stainless caliper bolts. :?
Top
Copper
Posts: 84
Joined: Thu Dec 06, 2012 8:41 pm
Location: Bristol

Postby Copper » Tue Apr 09, 2013 8:59 pm

Hi,

That should read the Guys not Guts!

He said that the calipers with m8 bolts are too thin but m10 are ok.

Jon
Top
Hayden
Member
Posts: 767
Joined: Tue Mar 04, 2008 12:10 pm
Location: Birmingham

Postby Hayden » Sat Jun 15, 2013 9:27 am

South_Oz wrote:I repainted an RZ Yamaha recently and used the same method. (with pics)

Image

Dave








These look good, but how come the paint isn`t damaged when you tighten everything back up?....
Top
User avatar
Daveg2812
Member
Posts: 1483
Joined: Mon Apr 27, 2009 3:03 pm
Location: Doncaster

Postby Daveg2812 » Sat Jun 15, 2013 1:02 pm

Hayden wrote: These look good, but how come the paint isn`t damaged when you tighten everything back up?....


Exactly my thoughts as I was reading this. :?
This ain't Twitter you know!

2003 R1100S with some bits on.
Top
boxerscott
Posts: 3718
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:
Contact boxerscott

Postby boxerscott » Sun Jun 30, 2013 10:10 pm

I was wondering about that too :?
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.
Top
Post Reply

Return to “Boxerspex”

Who is online

Users browsing this forum: No registered users and 42 guests