Bling Bling! Boxerlass's S

An opportunity to show your bikes in all their glory

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
Boxerlass
Posts: 260
Joined: Mon Sep 27, 2004 12:42 pm
Location: Lancashire - Up int' sticks.

Bling Bling! Boxerlass's S

Postby Boxerlass » Tue Nov 02, 2004 3:56 pm

Hi
Here is a photo of my S - probably not to everyone's taste, but hey, I like it! :lol:

I'm pretty thick skinned so bring on the comments! :wink:



http://usera.imagecave.com/pyoung/R1100S26Oct04.JPG

Pauline
Girls just wanna' have fun!
Top
User avatar
andrew s
Member
Posts: 1264
Joined: Wed Feb 18, 2004 10:33 am
Location: Fife Scotland

Postby andrew s » Tue Nov 02, 2004 4:03 pm

Well I like the colour, who put all the other gold bits on it? It is a pity that the whole engine was not black (save time cleaning it) think it would look wicked that way.

Next best colour to my BCR.

Andrew :roll:
A man can fall many times in life but is never a failure until he refuses to get up
Top
User avatar
Boxerlass
Posts: 260
Joined: Mon Sep 27, 2004 12:42 pm
Location: Lancashire - Up int' sticks.

Postby Boxerlass » Tue Nov 02, 2004 4:18 pm

Hi Andrew
We (me and my Hubby, Tony) added the gold bits. It is amazing how well the gold goes with the mandarin (if you like that sort of thing of course). We had the belly pan done as well, ordered it from Motorworks, courtesy of Boxer Design, and had the decals made up.
TBH I favoured a grey belly pan but Tony got his own way with a mandarin pan - I think it looks good though.
Thanks for the comments. :)

Pauline
Girls just wanna' have fun!
Top
User avatar
julian
Member
Posts: 1210
Joined: Sun Feb 22, 2004 7:25 pm
Location: W. London

Postby julian » Tue Nov 02, 2004 5:30 pm

Very nice - especially the yellow wheels.
Still a close second to all black as the best colour for an S

Julian
BMW R1100S (Black)
Suzuki TL1000S (Red)
Top
User avatar
Boxerlass
Posts: 260
Joined: Mon Sep 27, 2004 12:42 pm
Location: Lancashire - Up int' sticks.

Postby Boxerlass » Tue Nov 02, 2004 5:58 pm

8) Thanks Julian

I have to wear these 8) whenever I look at the bike! :wink:
Girls just wanna' have fun!
Top
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Postby Boxadog 2000 » Tue Nov 02, 2004 7:03 pm

V nice only needs a nice set of shiny stainless steel screws now to complete the job

Bob
Top
User avatar
stempy
Captain
Posts: 690
Joined: Wed Feb 18, 2004 8:41 pm
Location: I could tell you but then I'd have to kill you
Contact:
Contact stempy

Postby stempy » Tue Nov 02, 2004 7:35 pm

And a coat of black paint.
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Tue Nov 02, 2004 8:37 pm

... And some boxertrix stickers :wink:
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
User avatar
Mick Mac
Posts: 139
Joined: Tue Mar 02, 2004 10:19 am
Location: Fareham, Hants

Postby Mick Mac » Tue Nov 02, 2004 10:55 pm

And yet more black paint :wink:

Like the bar ends!
Top
User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Postby Boxadog 2000 » Wed Nov 03, 2004 12:12 am

Oh yaeh I forgot time to get those header pipes polished
Top
User avatar
winny
Posts: 104
Joined: Wed Sep 22, 2004 12:06 pm
Location: East Yorkshire

Postby winny » Wed Nov 03, 2004 9:13 am

Errr, why do you have a choice of number plates in your garage?

Is this a performance upgrade I may have overlooked! :lol: :lol:
Last edited by winny on Wed Nov 03, 2004 1:25 pm, edited 1 time in total.
1998 BMW R1100S
1981 Rickman Predator
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Wed Nov 03, 2004 11:44 am

Mick Mac wrote:And yet more black paint :wink:

Like the bar ends!


Mick,

I have a spare set you can have, since they're too bling for Gromit.

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
User avatar
Boxerlass
Posts: 260
Joined: Mon Sep 27, 2004 12:42 pm
Location: Lancashire - Up int' sticks.

Postby Boxerlass » Wed Nov 03, 2004 7:13 pm

Er, if Mick isnt interested, we would be (having slightly marked the brand new bar ends when I dropped it :cry:) Let us know will you?

The number plates in the garage are proper to the bikes, if you see B10 TPY or B11 TPY it is us!!

Pauline
Girls just wanna' have fun!
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Thu Nov 04, 2004 8:10 am

Boxerlass wrote:Er, if Mick isnt interested, we would be (having slightly marked the brand new bar ends when I dropped it :cry:) Let us know will you?

The number plates in the garage are proper to the bikes, if you see B10 TPY or B11 TPY it is us!!

Pauline


OK, I'll check them tonight to make sure they have no 'filtering scars'. I'll probably be up in Darwen at my Mother-in-law's in early December, so I could arrange to meet up and hand them over if you're still interested in them by then.

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
User avatar
Boxerlass
Posts: 260
Joined: Mon Sep 27, 2004 12:42 pm
Location: Lancashire - Up int' sticks.

Postby Boxerlass » Thu Nov 04, 2004 10:24 am

Sounds good Paul. I'll wait for you to PM or whatever on that.

Pauline
Girls just wanna' have fun!
Top
Post Reply

Return to “Boxerpix”

Who is online

Users browsing this forum: No registered users and 136 guests