Cee Bailey Screen

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

darkness
Posts: 172
Joined: Mon Nov 27, 2006 12:24 am
Location: SOUTH LONDON

Cee Bailey Screen

Postby darkness » Tue Nov 06, 2007 7:35 pm

Hi All

I am looking to fit a new screen for the 11s, was looking a the Cee Bailey Screens, as anyone tried /got one and what are your comments.



Darkness

jivebiker
Posts: 262
Joined: Thu Nov 25, 2004 5:07 pm
Location: Chesham, Bucks

Postby jivebiker » Wed Nov 21, 2007 7:41 pm

I've just ordered a 22" Touring Cee Baileys, as I find in the winter I need protection more than I dislike buffetting.

Should take about 2 weeks to arrive.

I'll post some comments when I've done a few runs with it.
JiVeBiKeR

Whatever happened to Cherry Jubblies?

darkness
Posts: 172
Joined: Mon Nov 27, 2006 12:24 am
Location: SOUTH LONDON

Postby darkness » Wed Nov 21, 2007 9:47 pm

Hi

I will look forward to your comments, to see how it compares with the MRA srceen.



Darkness

User avatar
iandunn1100ss
Posts: 356
Joined: Mon Aug 16, 2004 9:04 pm
Location: bristol

Postby iandunn1100ss » Wed Nov 21, 2007 10:42 pm

I had the 22 inch touring screen and got shot of it pretty quickly as it really did not suit me .its very heavy and moves around a lot and i found the wind noises was not worth the small weather protection gains and the looks where just plain awful.these are my view and i do hope you get on well with it .
ian
Bmw r1100s 02 frost blue,bmw r1100s 03 blue,Yamaha tmax500 03 silver
Honda fireblade rrx 98 orange and bronze,aprilia rs250 01 black and red,aprilia rsv milie 99 black and silver

User avatar
bill pierce
Posts: 50
Joined: Sat May 12, 2007 10:49 pm
Location: Rockford WA USA

Postby bill pierce » Thu Nov 22, 2007 2:46 am

I have the short 12" version. High quality, but of course not a lot of protection from a short screen.

jivebiker
Posts: 262
Joined: Thu Nov 25, 2004 5:07 pm
Location: Chesham, Bucks

Postby jivebiker » Mon Dec 10, 2007 12:54 am

Cee Bailey's tall touring screen arrived... but I can't get the holes to line up for mounting.

I am awaiting a replacement.

NOTE:- The tallest (+4 inch) screen has a very large flip up... Very large. Much more pronounced than the picture on their website.

I suspect this will cause more turbulence that I imagined, I will let you know if I manage to get the thing attached.

At he moment though my back has gone pop, so I'll not be fitting anything just yet!
JiVeBiKeR



Whatever happened to Cherry Jubblies?

jivebiker
Posts: 262
Joined: Thu Nov 25, 2004 5:07 pm
Location: Chesham, Bucks

Postby jivebiker » Tue Jan 01, 2008 8:40 pm

Replacement arrived. Still the holes don't line up properly so will be sending back.

I think their jig must be off as both screens holes are identically out by about a quarter inch.

Ah well....
JiVeBiKeR



Whatever happened to Cherry Jubblies?

darkness
Posts: 172
Joined: Mon Nov 27, 2006 12:24 am
Location: SOUTH LONDON

Postby darkness » Tue Jan 01, 2008 10:17 pm

Well, holes not in the correct places will not be good for sales, and the replacement is the same, that not very good. what do you thinks the odds will be for the third unit to be out of line.


Darkness

jivebiker
Posts: 262
Joined: Thu Nov 25, 2004 5:07 pm
Location: Chesham, Bucks

Postby jivebiker » Wed Jan 02, 2008 1:18 am

I'm not giving it a "third time lucky" chance. It's refund time.

However I'm still in the market for a more protective than stock screen... any ideas?
JiVeBiKeR



Whatever happened to Cherry Jubblies?

User avatar
Ruffy
Member
Posts: 437
Joined: Thu Nov 02, 2006 9:54 am
Location: eastmidlands

screens

Postby Ruffy » Wed Jan 02, 2008 2:50 pm

Give motorworks a ring jivebiker,they replaced my standard screen and the holes lined up perfectly,.at least they'll' give you advice which i think you need! Good luck.
ruffy

User avatar
moon
Posts: 31
Joined: Thu Feb 16, 2006 8:46 pm
Location: Louisiana in the USA

Postby moon » Mon Jan 28, 2008 10:17 pm

I'm using the Cee Bailey standard "Touring" windshield and had no problems with fitment (mounting holes). The bit of extra height and width is certainly welcome in rain and bad weather though the passenger apparently gets a bit more air.

I guess the "envelope" closes a little earlier behind the rider.

Another S rider here ordered the tallest one and found that he was getting too much heat from the oil radiator trapped behind the shield and a bit of "push " from behind so he drilled some pressure relief holes, about 1 1/2 - 2" in diameter low and to the center to help alleviate that problem.


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 114 guests