Another noise question

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

gismo
Posts: 5
Joined: Fri Oct 19, 2007 1:44 pm
Location: France

Another noise question

Postby gismo » Sun Oct 21, 2007 8:36 am

Hi
Following turnipbmw's comment on noise.

My 2000 1100s has a slight droning vibration only in 4th gear most noticeable at 60mph.

I've been told by a BMW mechanic that this is quite normal with this model. It's done 16,000 miles and has been like it since I bought it with 2,000 on the clock;

Any thoughts or comments would be appreciated
If you're not living on the edge then you're taking up too much space

johnl
Posts: 127
Joined: Thu Oct 19, 2006 7:50 pm
Location: here and there

Postby johnl » Sun Oct 21, 2007 10:34 am

i'd guess the drive shaft is out of phase. BMW mechanics will deny this is an issue but it made adifference on my bike. Opinion is generally split. try a search under 'phasing'

User avatar
Jason M
Posts: 1404
Joined: Wed Feb 18, 2004 7:56 am
Location: southampton

Postby Jason M » Sun Oct 21, 2007 12:23 pm

johnl wrote:i'd guess the drive shaft is out of phase. BMW mechanics will deny this is an issue but it made adifference on my bike. Opinion is generally split. try a search under 'phasing'


I'm in the 'doesn't make a difference' camp as I must have had the back end off 20 times and it's gone on randomly every time with no real difference. I had the back end off my GS however and the shaft has one 'double spline' that means it will only go on one way. The top and bottom UJs are not in line however as you might expect, but say one or two splines off being in-line. I guess that must be done for a reason.
2002 Black GSA (for random fault analysis and for stealing all my weekends fixing the b'stard)
2000 Black R1100S (for remembering the good old times)


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 114 guests