R1200S Paddock Stand Recommendations

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

paulR
Posts: 286
Joined: Sat Sep 02, 2006 7:38 am
Location: Hampshire, UK

R1200S Paddock Stand Recommendations

Postby paulR » Mon Nov 06, 2006 9:40 am

Has anyone bought a stand for their R1200S yet? I was hoping to adapt an old Ducati single sided stand I have but it goes in from the left hand side so won't be any good. I've also got an NWS stand (similar to ABBA) which normally mounts in the swinging arm pivot - any ideas where I could use this on the 1200S?

Thanks, Paul
Last edited by paulR on Mon Nov 06, 2006 11:22 am, edited 1 time in total.

R1200SRIDER
Posts: 75
Joined: Mon Oct 30, 2006 10:03 am
Location: Derbyshire

Postby R1200SRIDER » Mon Nov 06, 2006 10:19 am

Hi Paul, ive got the rear paddock stand from Wunderlich.It costs £68.30 and is very well made ,very strong and can be used on your own.I recommend it.Anybody else got anything different?
Ian

paulR
Posts: 286
Joined: Sat Sep 02, 2006 7:38 am
Location: Hampshire, UK

Postby paulR » Mon Nov 06, 2006 11:21 am

Thanks Ian, the Wunderlich looks just the job. I'll add it to my xmas list :D

User avatar
RoLoo
Posts: 1171
Joined: Tue Dec 20, 2005 11:37 am
Location: The Netherlands

Postby RoLoo » Mon Nov 06, 2006 11:38 am

...I use the BMW stand (at the rear)...
...very easy ; and you can (also) use it on your own...
Have a nice day !
Ron.

R1200S + R1200RT
(RoLoo as in RowLow...)

sandbar
Member
Posts: 1465
Joined: Tue Sep 14, 2004 7:08 pm

Postby sandbar » Mon Nov 06, 2006 12:20 pm

As far as I can tell, the best value paddock stand for the R1200S is the BMW one :shock:

Not the workshop stand which is way too expensive ( now there's a surprise :roll: ), but the accessory stand. You might need to make your dealer look at the fiches a bit harder.

The list price is about £124 inc VAT, and it is useable for either the R series or the K series. Large and plenty strong enough, it has a very long operating arm making it very easy to use.

I sell paddock stands but I still bought one.

sandbar

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Postby PBBoxer » Mon Nov 06, 2006 7:23 pm

That may explain something. I was after a BMW satnd as it is quoted in teh 1200s book, at 115 quid including the bracket. When I asked t Jeffries they told me they are 145!!

68 quid sounds a lot better then 145 eh
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary

User avatar
Dickypalm
Posts: 36
Joined: Tue Sep 19, 2006 2:18 pm
Location: Watford
Contact:

Postby Dickypalm » Mon Nov 06, 2006 7:35 pm

I bought a Harris padock stand at the NEC. Its made of Stainless and has bearings so the wheel can rotate but it cost £135, not cheap byt well made.

User avatar
Gats
Posts: 238
Joined: Tue Feb 17, 2004 8:41 am
Location: Back in Oz...

Postby Gats » Wed Nov 08, 2006 7:02 am

As an alternative, have a look at Anderson's Stands site here in Oz. They ship o/s but I reckon they could do with a dealer/distributor in Europe.
A mate who's a local suspension guru uses them exclusively and can't say enough about them. It's very good gear though a little pricier than some.

BTW, they don't show a R1200S stand on site at present but they do make it - it's a mirror of the K1200S stand.

http://www.andersonstands.com/
Gary Rose.
'06 R1200S Titanium with farkles - Moristech Pro Sequential Interceptor, full Remus system, carbon bits
'12 Tiger Explorer, loaded
'15 Triumph Thruxton ACE Cafe (hers)
-------------
A little inaccuracy saves a tonne of explanation.


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 103 guests