input shaft removal
Posted: Fri Apr 29, 2022 10:34 am
by Magic Man
Hi Guys, i have an 1100s and the input shaft went south last weekend. I have removed the clutch and transmission, and split the gearbox. my question is how do I get the input shaft out? All the rest of the box seems fine.I can't find any video tutorials online and my manual is really hard to follow. any help or bits of advice would be greatly appreciated.
Cheers Steve
Re: input shaft removal
Posted: Sat Apr 30, 2022 12:20 pm
by nab 301
Never had to do it myself even with over 130k miles clocked but plenty on here have . Might be something in this post ,
http://www.boxertrix.com/phpBB2/viewtopic.php?f=4&t=10343 plenty of documented gearbox strips on this forum if
you search "final drive failure"
Re: input shaft removal
Posted: Tue May 03, 2022 6:02 pm
by Magic Man
Hi thanks for your reply. Ive seen that post before and found it very useful when I did my sons clutch and slave cylinder