Page 1 of 1
10mm off set Telelever R1100S
Posted: Thu Nov 28, 2019 5:53 pm
by KTM AL
On the off chance has anyone got for sale or could do a 10mm off set Telelever mod?
Re: 10mm off set Telelever R1100S
Posted: Thu Nov 28, 2019 6:00 pm
by popsky
I’m not sure if these people are still active, might be worth a try
viewtopic.php?t=20727
Re: 10mm off set Telelever R1100S
Posted: Thu Nov 28, 2019 6:28 pm
by KTM AL
Hi
I did see this but the chap has not been on here for 2 years. I did send an email on the off chance. Cheers
Re: 10mm off set Telelever R1100S
Posted: Fri Nov 29, 2019 5:18 pm
by Lacedr
Try these guys Realm engineering:
info@realmengineering.comi emailed them and this is the reply that i received;
"We can supply the -10 Telelever including bearings outright for £225.00 plus VAT with Delivery FOC" .
i am probably going to invest in one myself.
regards
Dave
Re: 10mm off set Telelever R1100S
Posted: Sat Nov 30, 2019 7:36 pm
by KTM AL
Hi Dave
I have received the same email.
I think I will try the shorter torque arm from a GS first and see how that goes before forking out for a new modified Telelever arm.
Re: 10mm off set Telelever R1100S
Posted: Mon Dec 09, 2019 7:16 pm
by Lacedr
hi, sorry for the slow reply.
i have the gs torque arm on but cannot tell you the difference as its always been on the bike, although my front tyre is need of replacement so the steering isn't great at the moment because of it. i will have to see whats its like with a new tyre before i take the plunge!
regards
Dave
Re: 10mm off set Telelever R1100S
Posted: Tue Dec 10, 2019 9:14 am
by SP250
The shorter GS rear arm does raise the back of the bike and quicken the steering a bit.
But it also lets you get more lean angle before the heads touch down and give you that opposite lock fun with the rear tyre in the air.
John M