Shaft problem

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

BigRob
Posts: 29
Joined: Mon Jul 18, 2016 10:11 am
Location: Newbury, Berks

Shaft problem

Postby BigRob » Sat Oct 27, 2018 5:14 pm

Whilst enjoying a spirited ride I have broken the bike it starts runs but has no drive. It moves forwards and backwards when in gear so I suspect the shaft or uj is broken.

I am not competent enough to fix and looking for a mechanic in the south near Newbury Berks...Any advice?
In The Garage
R1200S - First Boxer What a Delight
S1000XR - Traded in
R1200RS - the New Toy
300 BHP Street Fightered Supercharged Triumph Rocket III
Nearly Done - Kenny Roberts rep FZ1S Tracker

User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Re: Shaft problem

Postby Blackal » Sat Oct 27, 2018 6:38 pm

Have to suspect splines over U/J, I think.

No idea as to a BMW-ish Independant down there, I’m afraid.


Al
Last edited by Blackal on Sat Oct 27, 2018 8:18 pm, edited 1 time in total.
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Shaft problem

Postby Humbug » Sat Oct 27, 2018 8:11 pm

If it's on the 12S it is most likely the UJ on one end of the shaft. It is actually an easy fix not above anyone that is confident with a spanner.
Expensive i'm afraid as the 12S shaft is not shared with other bikes and cost me £545 for the shaft from Balderstons.
Let me know if you need me to run through the repair but it only takes about an hour to replace.
11 plate KTM SMT

BigRob
Posts: 29
Joined: Mon Jul 18, 2016 10:11 am
Location: Newbury, Berks

Re: Shaft problem

Postby BigRob » Sat Oct 27, 2018 8:57 pm

Wow just an hour but it will be the whole shaft as you say was looking to do a few more things when i start so I think a little more time will be required
In The Garage

R1200S - First Boxer What a Delight

S1000XR - Traded in

R1200RS - the New Toy

300 BHP Street Fightered Supercharged Triumph Rocket III

Nearly Done - Kenny Roberts rep FZ1S Tracker

ted
Member
Posts: 175
Joined: Fri Nov 20, 2009 10:56 am
Location: Leeds, United Kingdom

Re: Shaft problem

Postby ted » Sat Oct 27, 2018 10:51 pm

i once had an issue that you might want to take a look at on my 1200s. Unknown to me at the time but the front bolt on the rear torque arm had lost its nut and bolt whilst i was riding. The arm was just sat in the forward mounting which is cup shaped and only caused an issue when i went over a crest and the lack of a mounted torque arm allowed the rear UJ to move off the diff splines and lost drive with the sound of shredded splines!

Not a massive job and i bought a second hand one from Motorworks. I did look at loads of 'perfect secondhand' ones which all seemed to come of GS's and were rusty and knackered so beware!

just wondered if yours could be the same as it was my 'spirited' riding over a crest that resulted in the issue!

BigRob
Posts: 29
Joined: Mon Jul 18, 2016 10:11 am
Location: Newbury, Berks

Re: Shaft problem

Postby BigRob » Sun Oct 28, 2018 10:45 am

Funnily enough it did happen after a crest

It’s all good advice thanks to all who have commented I just want to avoid BMW dealer costs and am seeking a recommended independent who can help now I need a mechanic in the south now to have a look
In The Garage

R1200S - First Boxer What a Delight

S1000XR - Traded in

R1200RS - the New Toy

300 BHP Street Fightered Supercharged Triumph Rocket III

Nearly Done - Kenny Roberts rep FZ1S Tracker

User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Re: Shaft problem

Postby Blackal » Sun Oct 28, 2018 11:41 am

If the torque arm bolt went - should be easy to see if that was the cause?

It’ll be missing.

(BigRob confused me with big rob, last night)

Studley’s Motorcycles pops up on google if you search for “BMW motorcycle independent hampshire Dorset”........


Al
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

ted
Member
Posts: 175
Joined: Fri Nov 20, 2009 10:56 am
Location: Leeds, United Kingdom

Re: Shaft problem

Postby ted » Thu Nov 01, 2018 5:26 pm

is it sorted yet?

BigRob
Posts: 29
Joined: Mon Jul 18, 2016 10:11 am
Location: Newbury, Berks

Re: Shaft problem

Postby BigRob » Fri Nov 02, 2018 4:30 pm

Not started yet next week I hope
In The Garage

R1200S - First Boxer What a Delight

S1000XR - Traded in

R1200RS - the New Toy

300 BHP Street Fightered Supercharged Triumph Rocket III

Nearly Done - Kenny Roberts rep FZ1S Tracker

ted
Member
Posts: 175
Joined: Fri Nov 20, 2009 10:56 am
Location: Leeds, United Kingdom

Re: Shaft problem

Postby ted » Fri Nov 23, 2018 9:24 pm

Any news ?


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 170 guests