Centre hub cover..

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
Skint
Posts: 130
Joined: Fri Feb 20, 2004 9:34 am
Location: I would mainly be sliding down the M1

Centre hub cover..

Postby Skint » Wed Mar 17, 2004 11:31 am

http://www.boxer-design.de/en/abdeckkappee.htm
Has anyone used the full cover onver the central hub, the the external cover a clip on/off to a cantral mounting or do they spring clip to the bolts??
When can the Highway agency lay softer road coverings??

Now rides a mangled wreck... Ho Hum back to the K100
Top
User avatar
adamski49
Posts: 1004
Joined: Tue Feb 17, 2004 8:59 am
Location: Cambridge

Postby adamski49 » Wed Mar 17, 2004 1:47 pm

No, I have one of these.

Image

http://www.users.bigpond.com/hayneskld/

Adam
Forgive me father for I have sinned... ex S owner moved onto pastures new with four cylinders and a chain... and back to a twin, albeit in a V.
Top
User avatar
Skint
Posts: 130
Joined: Fri Feb 20, 2004 9:34 am
Location: I would mainly be sliding down the M1

Postby Skint » Wed Mar 17, 2004 2:07 pm

just want to protect the Wheel nuts also...
Anyone found a supplier of those plastic doofers which cars used to have before wheel trims ???
When can the Highway agency lay softer road coverings??



Now rides a mangled wreck... Ho Hum back to the K100
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Wed Mar 17, 2004 2:41 pm

Skint,

I use the Wunderlich smooth silver central cap which covers the bolts and is held on by two very strong magnets over the wheel bolts. I've had mine for almost 3 years without problems, however there have been some posts on Pelican from people saying that they have lost the newer ones (that look like a huge hex bolt with a retaining clip) after some spirited riding over a rough surface.

The only down side to my hub cover is it does damage the paint on the edge of the hub. Might be worth while putting some tape on the underside to stop the metal disk rubbing the paint on the wheel, if you buy one.

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
User avatar
gus
Member
Posts: 2418
Joined: Thu Feb 19, 2004 5:10 pm
Location: birmingham

Postby gus » Wed Mar 17, 2004 10:30 pm

VW golf and polo early models used 17mm black caps,fit atreat.Get some from your local scrapyard or if your feelin flush go to a dealer.The haynes plug from the guy in OZ has got to be one of the best things you can buy for your S.
gus
Top
User avatar
bernsmartco
Posts: 214
Joined: Sat Feb 21, 2004 6:53 pm
Location: Worcester

Postby bernsmartco » Thu Mar 18, 2004 12:09 am

First thing I got for my bike was the plug from Mr Haynes in OZ.
Such a trusting chap sent it over with his address to send the cheque to.
Well worth the £8.50.
Bern.
Lots of posts on Pelican about expensive alloy and magnetic caps flying off never to be seen again.
Top
User avatar
RiceBurner
The Mirthman Prophecy
Posts: 1160
Joined: Wed Feb 18, 2004 10:30 am
Location: Hiding in your blind spot....
Contact:
Contact RiceBurner

Postby RiceBurner » Thu Mar 18, 2004 2:41 pm

adamski49 wrote:No, I have one of these.

Image

http://www.users.bigpond.com/hayneskld/

Adam


is it just me or does that look a bit damaged/craply made???
non quod, sed quomodo
Top
User avatar
adamski49
Posts: 1004
Joined: Tue Feb 17, 2004 8:59 am
Location: Cambridge

Postby adamski49 » Thu Mar 18, 2004 3:22 pm

It's just you :D
Forgive me father for I have sinned... ex S owner moved onto pastures new with four cylinders and a chain... and back to a twin, albeit in a V.
Top
User avatar
andrew s
Member
Posts: 1264
Joined: Wed Feb 18, 2004 10:33 am
Location: Fife Scotland

Postby andrew s » Thu Mar 18, 2004 4:13 pm

Bern,

What does this plug from Mr Haynes look like. And have you his contact details.

Andrew 8)
Top
User avatar
adamski49
Posts: 1004
Joined: Tue Feb 17, 2004 8:59 am
Location: Cambridge

Postby adamski49 » Thu Mar 18, 2004 4:34 pm

andrew s wrote:Bern,

What does this plug from Mr Haynes look like. And have you his contact details.

Andrew 8)


Andrew

It looks like that rather large pic in my post second from top and the contact details are via the link just below it.

Adam
Forgive me father for I have sinned... ex S owner moved onto pastures new with four cylinders and a chain... and back to a twin, albeit in a V.
Top
User avatar
andrew s
Member
Posts: 1264
Joined: Wed Feb 18, 2004 10:33 am
Location: Fife Scotland

Postby andrew s » Thu Mar 18, 2004 8:46 pm

Adam,

I didn't realise it was the same thing as Bern wrote about. I have just ordered some for us Scottish (as in living) Trixters. So if you read this Ian and Tom give me a call if you want one.

Andrew :twisted:
Top
la4ren
Posts: 4
Joined: Thu Mar 18, 2004 7:22 pm
Location: Heerhugowaard, holland

Postby la4ren » Fri Mar 19, 2004 8:27 am

I have also the plug from http://www.users.bigpond.com/hayneskld/

I'm really happy with it. Perfect service. Sent him an email he will sent one immediately to you. within a few days you have it!! I had a small problem because mine didn't fit because of the painted wheels. I sent him an email. He made a new one at no charge!! The 1.st is now fitted on the bike of my friend.

It is for me a wanna-have!!



[/img]
Regs, Henk
Top
la4ren
Posts: 4
Joined: Thu Mar 18, 2004 7:22 pm
Location: Heerhugowaard, holland

Postby la4ren » Fri Mar 19, 2004 8:28 am

I have also the plug from http://www.users.bigpond.com/hayneskld/

I'm really happy with it. Perfect service. Sent him an email he will sent one immediately to you. within a few days you have it!! I had a small problem because mine didn't fit because of the painted wheels. I sent him an email. He made a new one at no charge!! The 1.st is now fitted on the bike of my friend.

It is for me a wanna-have!!
Regs, Henk
Top
User avatar
Darth_1100S
Posts: 545
Joined: Wed Mar 03, 2004 9:22 pm
Location: It has a pier but it it ain't Blackpool or Brighton
Contact:
Contact Darth_1100S

Postby Darth_1100S » Fri Mar 19, 2004 10:34 am

Bloody 'ell Deja' Vu is alive and well peeps!

Think I'll mail the guy at

http://www.users.bigpond.com/hayneskld/

to get one......wonder what it looks like tho! :wink:


Dave 8)
If at first you don't succeed, destroy all evidence that you tried.
Top
User avatar
Skint
Posts: 130
Joined: Fri Feb 20, 2004 9:34 am
Location: I would mainly be sliding down the M1

Postby Skint » Fri Mar 19, 2004 1:08 pm

Cheers all, have ordered the haynes at about 8 quid, not bad.. I will have to keep a look out in all the car parks for Old VW's, yuk yuk,.
But thaks gus will get some of the old nut caps and spray them, purple on silver(greyish silver). What you think??
When can the Highway agency lay softer road coverings??



Now rides a mangled wreck... Ho Hum back to the K100
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 171 guests