How far to go without re-chipping??

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

winger

Postby winger » Thu Apr 01, 2004 5:40 am

After Malc's exsperience that cured me of any thoughts on a chip,for what little gain certainley not worth the risk,as for fuel range mine normally comes on at around 115-120 mark but then i can only get 11 litres or so to fill up.

My big tank is hanging on the garage wall!!!.


Chris

User avatar
crucial
Member
Posts: 268
Joined: Fri Feb 20, 2004 9:12 am
Location: Probably filtering on the M25

Postby crucial » Thu Apr 01, 2004 8:29 am

Bailey, mine doesn't cough and splutter at low revs with the K12 reg. I believe it adds about 8% more fuel across the whole range. I've just always had the feeling it's a little rich low down, but it's not a lot, and more than made up for by the way it pulls to the red line. 8)

Having said that, without having it dynoed i'm probably talking out of me ar*e :D

User avatar
bigblackfalco
Posts: 1922
Joined: Wed Feb 18, 2004 10:05 am
Location: Darkest Aberdeenshire

Postby bigblackfalco » Thu Apr 01, 2004 8:50 am

A lot of my riding is slow stuff in London.I'd just hate to have that 'choke stuck on feeling' when you are trying to filter through the traffic.
How much hassle is it to change??
Where are you situated,wouldn't mind a look at a bike with it fitted.
Bailey.

User avatar
bigblackfalco
Posts: 1922
Joined: Wed Feb 18, 2004 10:05 am
Location: Darkest Aberdeenshire

Postby bigblackfalco » Thu Apr 01, 2004 8:56 am

Forgot to add.Did you say you've done away completely with the o2 sniffer.I guess it would really confuse the Motronic if you ran it connected?
Bailey.

User avatar
crucial
Member
Posts: 268
Joined: Fri Feb 20, 2004 9:12 am
Location: Probably filtering on the M25

Postby crucial » Thu Apr 01, 2004 12:42 pm

Yes, the sniffer is gone. The reg is easy enough to change, it's below the battery so its the usual hastle, bodywork, tank, snorkel etc.

I live in Essex but work near Hampton Court, your more than welcome to have a look.

Paul.

User avatar
minivin
Posts: 1027
Joined: Tue Feb 17, 2004 8:23 am
Location: Amesbury, Wiltshire

Postby minivin » Thu Apr 01, 2004 3:53 pm

feeeeyuuuuuu <wipes brow> might have to drill the filler neck this weekend then :)


stempy wrote:Standard tank, but I did drill a hole in the filler neck so I could over fill it. 8)
Classic Motorcycle Magazine, Young Motorcyclist of the Year 2003


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 155 guests