slparry wrote:Daveg2812 wrote:If I have a (very) slight criticism of the Telferizer mount, it's that it can come loose. It could do with a couple of flats milling on to it so you could get a spanner on it to tighten it. Had considered putting a drop of lock tight on the threads, but was concerned that I then might not get it off again.
oooo given how fine those threads are I'd think some loctite would be a safer bet than overtightening
Just fitted mine today, what a pleasant buying experience and fitting took ten seconds. Mine has flats for a 11mm spanner to gently tighten it (two fingers near the head of the spanner). Road tested for around 100miles today at a variety of speeds, some even legal, stayed tight
.
Ive put some pics up and a link to Telferizer in the Recommended products/services section.