motor cut out!!!!
Moderators: Gromit, Paul, slparry
-
- Posts: 45
- Joined: Wed Feb 15, 2006 6:55 pm
- Location: Darkest Dorset.
motor cut out!!!!
Only had the 1100s a few months so I dont really know my way around the bike yet.
So, the sun came out ,took the bike for a spin, after ten miles the engine cut out.
I tried to start it, she fired once then nothing but after getting a tzxi home and returning with my pick-up the bloody thing started ..............
Is there a common electrical fault with these bikes that everyone exept me knows about?
Hope someone may have an answer.
Thanks, Paul.
So, the sun came out ,took the bike for a spin, after ten miles the engine cut out.
I tried to start it, she fired once then nothing but after getting a tzxi home and returning with my pick-up the bloody thing started ..............
Is there a common electrical fault with these bikes that everyone exept me knows about?
Hope someone may have an answer.
Thanks, Paul.
-
- Posts: 45
- Joined: Wed Feb 15, 2006 6:55 pm
- Location: Darkest Dorset.
I've had the bike running in the shed tonight and you would not think there is anything wrong with it at all.
I tried the side stand when it stopped first.
Thanks for all your help.
These modern bikes are a bit of an unknown to me.
Never had a fuel injected bike with all these sensors etc.
I will ride around close to home this weekend and see what happens.
p.s. got a taxi home when the bike stopped.
picked the bike up on my toyota and blew the head gasket and rad on the way back!!!
S**T really does happen!!
I tried the side stand when it stopped first.
Thanks for all your help.
These modern bikes are a bit of an unknown to me.
Never had a fuel injected bike with all these sensors etc.
I will ride around close to home this weekend and see what happens.
p.s. got a taxi home when the bike stopped.
picked the bike up on my toyota and blew the head gasket and rad on the way back!!!
S**T really does happen!!
Pheasant Plucker wrote:I've had the bike running in the shed tonight and you would not think there is anything wrong with it at all.
I tried the side stand when it stopped first.
Thanks for all your help.
These modern bikes are a bit of an unknown to me.
Never had a fuel injected bike with all these sensors etc.
I will ride around close to home this weekend and see what happens.
p.s. got a taxi home when the bike stopped.
picked the bike up on my toyota and blew the head gasket and rad on the way back!!!
S**T really does happen!!
How old is the bike and how many miles has it done? Mine kept doing this (usually when filtering through traffic on the motorway). It turned out to be the wire from the ignition to the fusebox (that gets constantly bent when steering) had developed a break/chaff. Cost me about £20 for a 2nd hand one from Motorworks.
Jason
-
- Posts: 45
- Joined: Wed Feb 15, 2006 6:55 pm
- Location: Darkest Dorset.
Pheasant Plucker wrote:Thanks Jason, I'll check this out as it sounds so much cheaper than a hall sensor.
The Halls sensor is just a little thing that sits on a plate behind the alternator belt wheel on the end of the crank - you will be able to pick up a 2nd hand one no probs if it's that, and they're dead easy to replace. I think that if the problem is intermittent though it's less likely to be the sensor (hopefully)
Jason
-
- Posts: 45
- Joined: Wed Feb 15, 2006 6:55 pm
- Location: Darkest Dorset.
I have run the bike for about 20 minutes in the shed tonight, I've moved the wires back and forth but not found a fault.
I cant imagine it could be the ignition trigger because it just keeps running O.K.
I will have to go for a longer ride and if there is a problem perhaps Carole Nash or those nice people in the RAC may bring me home.
I must get to the bottom of the problem as I intend to ride to the south of France later in the year.
Thanks for all your suggestions, Paul.[/quote]
I cant imagine it could be the ignition trigger because it just keeps running O.K.
I will have to go for a longer ride and if there is a problem perhaps Carole Nash or those nice people in the RAC may bring me home.
I must get to the bottom of the problem as I intend to ride to the south of France later in the year.
Thanks for all your suggestions, Paul.[/quote]
-
- Posts: 45
- Joined: Wed Feb 15, 2006 6:55 pm
- Location: Darkest Dorset.
motor cut!!!!
You meet the nicest people on a Honda was the seventies add.............
They must all ride 1100s's now !!!!!!!
Thanks for all your help. Problem not sorted yet but its raining so I'm off to my shed.
They must all ride 1100s's now !!!!!!!
Thanks for all your help. Problem not sorted yet but its raining so I'm off to my shed.
Who is online
Users browsing this forum: No registered users and 130 guests