BoxerCup Replica N/S rear indicator

[BoxerCup R]

Morning

I've broken the lung which holds the nearside rear indicator into its bracket on the R1100s #clumsyfool
I've cable tied it on for now to hold it in place but does anyone know if other BMW's have the same indicator so I can widen my search on e-bay ?
Cheers

[jeznewsome]

I think that they are unique to the R1100S

Is it just the 'holder' that is broken?

Pt No. 63 13 2 306 801 TURN INDICATOR HOLDER
https://shop.maxbmw.com/fiche/NotesParts/63132306801_4_N.jpg

[KTM AL]

That's great I didn't know you could just replace the stem, I'm always breaking mine in the garage.
Found them at Motorworks.
https://www.motorworks.co.uk/vlive/Shop ... &search=GO

[Mitch1100]

Walked into the rear indicator of my HP 2 Sport...$100 aud for replacement

[BoxerCup R]

Walked into the rear indicator of my HP 2 Sport...$100 aud for replacement

Fook me, thats not cheap

[jeznewsome]

So I dropped in to the local stealer on Friday and picked up a rear holder to replace the bodged RHS one on my 1100S

Figured that the connector was somewhere under the luggage grid area, so lots of bolts, panels and the rack later later........it appears to be buried deep in the wiring loom.

A quick crosshead screwdriver later and the lens off the indicator and there are a couple of small spade connectors in the indicator itself.

Basically changing the holder is only a crosshead screwdriver job! DOH!

[BoxerCup R]

So I dropped in to the local stealer on Friday and picked up a rear holder to replace the bodged RHS one on my 1100S

Figured that the connector was somewhere under the luggage grid area, so lots of bolts, panels and the rack later later........it appears to be buried deep in the wiring loom.

A quick crosshead screwdriver later and the lens off the indicator and there are a couple of small spade connectors in the indicator itself.

Basically changing the holder is only a crosshead screwdriver job! DOH!

Nightmare Jez, thanks for the info though