R1200S Paddock Stand

[DPG]

I've always used an Abba stand for the BCR but the 12S sits way up high on it. Too high for oil changes really although its perfect for everything else.
I don't want to buy yet another Abba so I need a cheap rear paddock stand.
Any thoughts, comments, recommendations?
Price is an issue so "good for the money" is where I'm aiming. It's only for oil changes and jet washing the bike down. I can use the Abba stand for everything else..

[dave the german]

I'll find out what make mine is - think it came from Germany and the black one was cheaper than the red one!!(identical stands) - I'll post back

[Mitch1100]

These are cheap
[P1020161 by Phil Mitchell, on Flickr][/img]

[dysondiver]

four bits of pipe ,,,
twenty quid at the most allowing for a bit of delrin ,, if you weld or know a welder

[dysondiver]

hb4m-c-c20a.jpg (32.12 KiB) Viewed 9852 times

[dysondiver]

handy stand.jpg (98.78 KiB) Viewed 9851 times

[dysondiver]

hope those pics help ,,, nice and simple diy project

[Justcruising]

I initially got front & rear paddock stands for my R12S, BUT after acquiring the Becker-Technik Service Lifter I wouldn’t be without it and probably never bothered with the paddock stands had I found it first. See http://shop.becker-technik.de/en/motorbike-lifters/20-bmw-r1200s-lifter.html

[popsky]

I initially got front & rear paddock stands for my R12S, BUT after acquiring the Becker-Technik Service Lifter I wouldn’t be without it and probably never bothered with the paddock stands had I found it first. See http://shop.becker-technik.de/en/motorbike-lifters/20-bmw-r1200s-lifter.html

Thought I’d finish buying things for my 12s but that lifter looks excellent, might have to get the cheque book out