Stopping the air filter clogging up

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Postby nab 301 » Wed Apr 10, 2013 9:47 pm

el-nicko wrote:* For those of you who have been following the 'Drainpipe Drama' I eventually managed to put a curve in 'em by sliding 'em over a length of very thick dia. rubber hydraulic tube (that fitted inside snug) off a digger that's in the workshop and bending it whilst I blasted it with my trusty heat-gun. :wink:


What ? no photos.. :wink:
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Wed Apr 10, 2013 10:20 pm

nab 301 wrote:
What ? no photos.. :wink:


Sorry, no. I had no free handz. :lol:
.

Image

Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.

It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
User avatar
AZ Pete
Posts: 20
Joined: Sun Sep 02, 2012 7:41 pm

Postby AZ Pete » Wed Apr 10, 2013 11:11 pm

gus wrote:Hi all
Val singletons filter mod( do a search) or san Jose filter. No block filters and you run a air duct as is required. Or stop being lazy and service your filter more often. Removing ducts and fitting socks is backward engineering...
All the best
Gus


Gus, did the search.....nothing came up. Can you elaborate on what this is?
Top
User avatar
gus
Member
Posts: 2418
Joined: Thu Feb 19, 2004 5:10 pm
Location: birmingham

Postby gus » Thu Apr 11, 2013 12:07 am

Dai has one the searching and found the thread. It's in air filter .
Gus
Top
User avatar
AZ Pete
Posts: 20
Joined: Sun Sep 02, 2012 7:41 pm

Postby AZ Pete » Thu Apr 11, 2013 12:51 am

Thanks Gus, right where you said.
Top
User avatar
HerrFlick
Posts: 393
Joined: Thu Dec 27, 2012 7:25 am
Location: Brisbane, Australia.

Postby HerrFlick » Thu Apr 11, 2013 5:20 am

el-nicko wrote:Well just today I've fitted those induction toobs I made from B&Q drainpipe* :shock:, put in a nice new air filter with some of that very thin gauzey :? stuff over the top and left the inlet trunking off :!: Then it started raining :( sooooo; I locked the shed and went indoors. :lol:

* For those of you who have been following the 'Drainpipe Drama' I eventually managed to put a curve in 'em by sliding 'em over a length of very thick dia. rubber hydraulic tube (that fitted inside snug) off a digger that's in the workshop and bending it whilst I blasted it with my trusty heat-gun. :wink:



Aaaaah El Nicko. Just knew you'd find a way. :) Cripes - for a second I thought it was something else you'd bent them with ... :oops:

BTW - have you managed to reduce the diameter?


Cheers

John C.

.
Real torque curves don't have a first derivative. :-^)
Top
User avatar
Dai wiskers
Member
Posts: 1262
Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly

Postby Dai wiskers » Thu Apr 11, 2013 7:54 am

Val Singleton's great the filter can fill totally with wasps stones etc and still breath better than the stock filter
But remember if your bike run's lean before doing the mod it will run leaner after an accelerator module will sort that and improve fueling throughout the range
http://www.sol2.be/Performance/ENG/Home/index.html
My bike shines when it rains!!!!!!!!!!!!!!!!!

Dyslexic Dai


Steptoe
http://www.gsshop.biz/


Dan Cata
http://boxer-upgrades.webs.com/


Lennie
http://www.boxer-performance.com/index.html
Top
User avatar
Dai wiskers
Member
Posts: 1262
Joined: Mon Jul 09, 2012 7:21 pm
Location: Caerphilly

Postby Dai wiskers » Thu Apr 11, 2013 7:59 am

el-nicko wrote:Well just today I've fitted those induction toobs I made from B&Q drainpipe* :shock:, put in a nice new air filter with some of that very thin gauzey :? stuff over the top and left the inlet trunking off :!: Then it started raining :( sooooo; I locked the shed and went indoors. :lol:

* For those of you who have been following the 'Drainpipe Drama' I eventually managed to put a curve in 'em by sliding 'em over a length of very thick dia. rubber hydraulic tube (that fitted inside snug) off a digger that's in the workshop and bending it whilst I blasted it with my trusty heat-gun. :wink:



Oi who you calling a very thick dai
My bike shines when it rains!!!!!!!!!!!!!!!!!



Dyslexic Dai





Steptoe

http://www.gsshop.biz/





Dan Cata

http://boxer-upgrades.webs.com/





Lennie

http://www.boxer-performance.com/index.html
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Thu Apr 11, 2013 11:28 am

Dai wiskers wrote:
el-nicko wrote:
...... I eventually managed to put a curve in 'em by sliding 'em over a length of very thick dia.



Oi who you calling a very thick dai



:roll: Dai, you really are dyslexic.

[smilie=sofa.gif]
Last edited by el-nicko on Thu Apr 11, 2013 5:49 pm, edited 1 time in total.
.



Image



Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.



It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Thu Apr 11, 2013 11:33 am

HerrFlick wrote:
el-nicko wrote:
BTW - have you managed to reduce the diameter?

Cheers
John C.

.


Wasn't a problem John, they just fit. Haven't been out on it yet but because I've left the trunking off the induction noise is satisfyingly LOUD!
.



Image



Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.



It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
dave the german
Member
Posts: 3625
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Postby dave the german » Thu Apr 11, 2013 5:37 pm

I was going to suggest some hydraulic digger hose earlier Nick [smilie=whistle.gif]
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike
Top
User avatar
el-nicko
Member
Posts: 1562
Joined: Tue Mar 13, 2012 3:04 pm
Location: Nick from HEREFORDSHIRE, The Oceanian province of Airstrip One.

Postby el-nicko » Thu Apr 11, 2013 5:56 pm

dave the german wrote:I was going to suggest some hydraulic digger hose earlier Nick [smilie=whistle.gif]

:lol: :lol: :lol:

Cheers Dave. You just sit there and watch me struggle mate. :roll:
.



Image



Mr. Spock is my role model so be advised; I possess no (discernible) sense of humour.



It's all VFR (DCT) round here now. STILL missing my 1100s tho.
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 60 guests