No electrics

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

User avatar
f800s
Member
Posts: 118
Joined: Sat Jan 29, 2011 8:55 am
Location: NW Kent

Postby f800s » Sat Oct 06, 2012 10:37 am

I've checked the voltage coming off the battery and it's 12.39v. No relays click or fuel pump primes when switched on. The small circlip that holds the side stand switch onto the side stand pivot had come off but the switch and washer hadn't, but were just loose. I've removed it all and put it back together and inspected and wiggled the wires in the main loom, but she's still dead. ;-(

I'm afraid that's the extent of my mechanical abilities!!! It's definitely a trip in the van next week into Bromley to see my mechanic.

User avatar
ned1
Member
Posts: 1485
Joined: Wed May 14, 2008 1:30 pm
Location: Herts UK
Contact:

Postby ned1 » Sat Oct 06, 2012 1:28 pm

That battery voltage seems low to me,
Why don't you put some jumps leads on just to prove it before it go's for a ride the the van !!
Yesterday R1100S 03, today K1300s sport
Ride like they are all out to kill you and you will live to ride another day............Ned 2008

User avatar
f800s
Member
Posts: 118
Joined: Sat Jan 29, 2011 8:55 am
Location: NW Kent

Postby f800s » Sat Oct 06, 2012 3:25 pm

Nope, still dead!!!

User avatar
f800s
Member
Posts: 118
Joined: Sat Jan 29, 2011 8:55 am
Location: NW Kent

Postby f800s » Thu Oct 11, 2012 5:34 pm

All fixed. Turns out to have been the ignition switch. Although it did confuse the mechanic as he said when he put his volt meter thingey across it it showed it was OK but obviously wasn't. He put a new switch in and replaced part of the surrounding loom.

Thanks for your advice, excellent as ever.

User avatar
Boxadog 2000
Member
Posts: 1908
Joined: Wed Feb 18, 2004 8:29 pm
Location: Looking over hedges

Postby Boxadog 2000 » Thu Oct 11, 2012 6:29 pm

Should have listened to Stepto free advice you could have fixed it for free

User avatar
f800s
Member
Posts: 118
Joined: Sat Jan 29, 2011 8:55 am
Location: NW Kent

Postby f800s » Fri Oct 12, 2012 6:05 pm

I did try the wiggle test but it was the actual switch that was causing the problem.

User avatar
Dingle
Posts: 212
Joined: Fri Jan 08, 2010 8:08 pm
Location: Portsmouth

Postby Dingle » Wed Nov 14, 2012 6:14 pm

I had pretty much the same problem.

Check the wiring along the left hand electrics box under the fairing. All looked well.

I ended up chasing circuits with a multi meter and found the naughty wire. It had been rubbing on the corner of the box and had corroded internally casing the break in the circuit.

I had lights and other bits but no fuel pump etc...
Image


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 123 guests