Running in complete

Pull up a chair - let's talk Boxerbollox

Moderators: Gromit, Paul, slparry

Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Running in complete

Postby Humbug » Thu Oct 31, 2019 5:49 pm

IMG_1434.JPG
IMG_1434.JPG (786.88 KiB) Viewed 9910 times
Managed to finish running the 12S in today, my thanks to Cadwell park, Donnington Park, France and Spain for their assistance in providing miles. :D
11 plate KTM SMT

ted
Member
Posts: 175
Joined: Fri Nov 20, 2009 10:56 am
Location: Leeds, United Kingdom

Re: Running in complete

Postby ted » Thu Oct 31, 2019 7:14 pm

Great to see that the 1200s is capable of keeping with the tradition of BMW's and their high mileage. Mines just getting to 20000 so still away to go! Do you have a list of work that you have done over the period and the mileages that things went wrong - i assume its needed some work?

User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Running in complete

Postby nab 301 » Thu Oct 31, 2019 7:45 pm

Nice !
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

Lauri
Posts: 3
Joined: Sat Oct 29, 2016 4:56 pm

Re: Running in complete

Postby Lauri » Thu Oct 31, 2019 8:24 pm

I remember reading years ago about a r1200s in Japan with 400000km.

Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Running in complete

Postby Humbug » Thu Oct 31, 2019 9:25 pm

ted wrote:Great to see that the 1200s is capable of keeping with the tradition of BMW's and their high mileage. Mines just getting to 20000 so still away to go! Do you have a list of work that you have done over the period and the mileages that things went wrong - i assume its needed some work?

Aside from the usual service items pads, oil, filters and alternator belts there have been a few bits done
Replacement oil cooler £99 eBay
Final drive rebuild £400 Mile Overy
Front calliper rebuild £390 Balderstons
Replacement rear calliper £60 eBay
Replaced snapped shaft (UJ failed) £545 Balderstons
Couple of sets of fork seals £30 eBay
Replacement front shock absorber £200 Hagon
2 Rear shock services £180 each !00% Suspension
Four sets of front wheel bearings £20 per set eBay
2 sets of front discs £90 a disc
2 rear discs £80 each
Got to say that things haven't happened before about 60,000 miles with all of the items above except the oil cooler spread from there up to the present. Oil cooler broke a weld at 35,000. The engine has been great all the way through, adjust the valves and change the oil and filters regularly, that's it.
Ive got to say that the bike has had a hard life and hasn't been wrapped in cotton wool, its ridden through the winter, been on trackdays, toured Europe and generally done what it was built for. Paint to engine and wheels has suffered although got a nice front wheel from a forum member to replace a buckled one. Keep looking at replacements but after a great track day at Cadwell a week after returning from a 2500 mile tour of the Pyrenees couldn't think of an all round replacement.
11 plate KTM SMT

boxerscott
Posts: 3718
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Re: Running in complete

Postby boxerscott » Sat Nov 02, 2019 11:59 pm

That is pretty impressive! I respect the loyalty and divinity you share to your "auld lassie" I would hate to part with it... but their are modern bikes to be viewed when you take off your rose tinted goggles that may be loads better all rounders!! :wink:

Chris.
Fiat Panda.
Fiat Scudo (with speedblock, pipe carrier, reversing sensors, reversing camera, tow bar, some new rust and Fake Plumber logo)


started out with nothing, still have most of it left.

Neil178
Posts: 761
Joined: Sun Aug 29, 2004 11:24 pm
Location: East Mids

Re: Running in complete

Postby Neil178 » Sun Nov 03, 2019 2:55 am

Did you have the bike from new? Well done on that milestone.
I’ve seen some pics on car sites where the trip meter is 100.00 and the time is 10.00.
Looks good but ffs I could never be so organised.

Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Running in complete

Postby Humbug » Sun Nov 03, 2019 2:16 pm

Got it with 23,000 on the clock. Problem with replacing it is i have always liked a bit of a quirky bike, something a bit out of the ordinary. Too many new bikes don't seem to have any soul.
11 plate KTM SMT

User avatar
popsky
Member
Posts: 1893
Joined: Tue Apr 21, 2009 5:09 pm
Location: Minehead Somerset

Re: Running in complete

Postby popsky » Sun Nov 03, 2019 4:10 pm

Superb Humbug, and I agree with your sentiments I’ve not covered anywhere near that mileage but there’s just nothing out there that floats my boat, and I must say since the Ohlins service new steering damper and full bike service it’s never felt better, and I’ve had mine 11 years and 36K miles
Phil.

R1200S and loving it !

Hoch Bergstraßenjäger…………………………………

Neil178
Posts: 761
Joined: Sun Aug 29, 2004 11:24 pm
Location: East Mids

Re: Running in complete

Postby Neil178 » Mon Nov 04, 2019 5:07 pm

So the next milestone is 123,000 miles?
I couldn’t do long miles on mine without backside pain so I had to sell it. I have another bike for Sunday blasts and my trusty 1100S for touring on.
I know what you mean about it being quirky. Would a KTM or Ducati be left field enough?

Humbug
Member
Posts: 656
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: Running in complete

Postby Humbug » Mon Nov 04, 2019 6:07 pm

Thought about an RC8R or maybe an Aprillia Mille R
11 plate KTM SMT


Return to “Boxerbanter”

Who is online

Users browsing this forum: No registered users and 138 guests