Stuffing up my belly pan

Pull up a chair - let's talk Boxerbollox

Moderators: Gromit, Paul, slparry

User avatar
GerryB
Posts: 620
Joined: Thu Sep 12, 2013 4:40 pm
Location: Jacarilla , Spain

Stuffing up my belly pan

Postby GerryB » Wed Oct 05, 2016 1:11 pm

The route I most often ride has a tight well banked Left on way out and right on the way home .

There is a bit of a dip right in the middle .

If for some reason I ride through it at 50 or so , ( cyclists, tractors , cars or even bikes) its fine .

However , when the road is clear , the belly pan hits the ground .

I try to remember, but normally I only remember while I'm scraping it ....

I been thinking of taking it off .
Old man ... now .
Ex Off Road & Enduro Rider...

User avatar
Britisherspy
Posts: 499
Joined: Sat Apr 03, 2010 7:19 pm
Location: Lichfield

Postby Britisherspy » Wed Oct 05, 2016 4:28 pm

I was given one with my bike but I won't be fitting it, just vanity

There was one in my boxercup too, it ended up filthy
Last edited by Britisherspy on Wed Oct 05, 2016 4:35 pm, edited 1 time in total.

User avatar
GerryB
Posts: 620
Joined: Thu Sep 12, 2013 4:40 pm
Location: Jacarilla , Spain

Postby GerryB » Wed Oct 05, 2016 4:31 pm

Britisherspy wrote:I was given one with my bike but I won't be fitting it, just vanity



It looks great , but I don't like stuffing things up ....
Old man ... now .

Ex Off Road & Enduro Rider...

User avatar
GerryB
Posts: 620
Joined: Thu Sep 12, 2013 4:40 pm
Location: Jacarilla , Spain

Postby GerryB » Sat Oct 08, 2016 9:02 pm

The belly pan , not too bad ....

Image
Old man ... now .

Ex Off Road & Enduro Rider...

User avatar
Phil K
Member
Posts: 187
Joined: Tue Feb 13, 2007 9:26 am
Location: North Yorks

Postby Phil K » Mon Oct 10, 2016 9:08 am

Assuming it's an 11s fit the shorter paralever arm to lift it up?

Phil
R11s + Val Singleton Power filter - Lennies induct - Y Piece - Wilbers - PC111
1974 Honda CB750 1974 Triumph Trident T150 Oh and a GS-LC

User avatar
er-minio
Posts: 190
Joined: Tue May 28, 2013 8:50 am
Location: London/Rome

Postby er-minio » Mon Oct 10, 2016 10:51 am

However , when the road is clear , the belly pan hits the ground .


Assuming the bellypan is mounted in the same position as the ones on the Boxercups... how are your shocks?

On my R1150R... when the shocks were on their way out (about 50k km) I used to touch with the bottom of the bike, when fully loaded, on some tight corners up the mountains...
R1150R '03 (in pieces)
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]

User avatar
GerryB
Posts: 620
Joined: Thu Sep 12, 2013 4:40 pm
Location: Jacarilla , Spain

Postby GerryB » Mon Oct 10, 2016 6:53 pm

er-minio wrote:
However , when the road is clear , the belly pan hits the ground .


Assuming the bellypan is mounted in the same position as the ones on the Boxercups... how are your shocks?

On my R1150R... when the shocks were on their way out (about 50k km) I used to touch with the bottom of the bike, when fully loaded, on some tight corners up the mountains...


I think the shocks are ok , certainly handles well.

Just the very occasional dip when going hard ....

I'm now getting it into my brain , and last saturday , rolled off and NO TOUCH !!!!

So , I'll not worry too much for now .
Old man ... now .

Ex Off Road & Enduro Rider...


Return to “Boxerbanter”

Who is online

Users browsing this forum: Bing [Bot] and 121 guests