Page 1 of 2

Planes,bikes, boats and automobiles

Posted: Mon Apr 27, 2015 10:14 pm
by Boxermed69
Still haven't got around to writing up last year's european jaunt :oops:

...but I'm off my lazy arse to relate last Thursday's adventure. Apologies in advance for the lack of pics; (a) it didn't occur until I was halfway home, and (b) I was on a bit of a mission to get home.

I was off last week until Friday night. The plan was hatched and the logistics sorted between Monday and Wednesday.

Up at 0400hrs on Thursday. On the road at 0430, courtesy of 'dad cab', for the 70 mile drive to Bristol Airport. We were a bit early - what a difference travelling on the A37 at that hour makes!

The best airport experience to date was had: no queue for luggage check-in or security. Twas almost a pleasure. The Ryanair flight to Dublin landed on time at 0905hrs.

The luck held as everyone queued for immigration checks. No-one seemed to want to use the 'fast lane' DIY facilities for those with 'chip' passports, despite encouragement from airport staff. I didn't need a second invite - straight through, no bother, as they all queued on...

As I arrived at the conveyor in the luggage hall (I was first there) the belt started....and my bag was the first out! Surely I'll be paying for this later...?

Mine host, Tony, was waiting in Arrivals. He drove us the 35 minutes to his place in Celbridge, a few miles west of Dublin.

Saw bike - liked bike - studied paperwork - bought bike :D

Spent the next hour drinking tea and struggling to book a ferry online and arrange insurance over the phone. I'd already sorted the cover and just needed to activate it. The VIN number was required as the bike's Irish registered. The biggest problem was trying to figure out what std code prefix to use - the usual Eire to NI code didn't work. Got there in the end.

Luggage packed, suited and booted, headed off back to Dublin with Tony's suggested route in mind. Sod the ring road to Dublin Port. Good call. I rode through the centre of the city alongside the Liffey. Proper picturesque :)

Got the 1515hrs Stenaline ferry to Holyhead. Again, one of the first on board (only one other motorbike on the boat). I was settled in my comfy lounge chair while cars were still queueing to load :wink:

Only managed to snatch about half an hour's kip during the 3.5hr crossing (special thanks to the Chinese extended family nearby who must've shared a bargain bucket of amphetamine :evil: ).

The Irish Sea was like the proverbial mill pond and folk were sunbathing on the starboard deck. It were reet nice as I watched countless large jellyfish rotating as they floated past just a few inches under the water's surface.

Disembarked at 1855hrs. Pulled over in Holyhead to add a warm layer and change visors. Got underway at 1920. A55 to Bangor, then onto the A5 towards Betws-Y-Coed. That ride through Snowdonia with almost zero traffic and the crimson sun behind me is one I'll cherish the memory of. I started to click with the bike and made smooth and fairly rapid progress across North Wales.

Trundled past the WPH at about 2030hrs. Sure I glimpsed a solitary blue/white bike outside - that you Steve P.? So, I lied - I DID get to Llangollen this year, but unfortunately a day early :(

Onward to Shrewsbury. Was almost at Telford and the M54 before it was completely dark. It was my plan to try to hit the motorways by night fall.

I won't lie, the M54, M6 and M5 were no fun at all, but a means to an end. Unsurprisingly I was feeling increasingly tired and it was becoming decidedly nippy - those heated grips were a boon :). For safety I decided to stop every hour after 2100 to stretch the legs and inject caffeine.

Finally hit the A358 at Taunton at almost 0100hrs Made my second and last fuel stop on the A303 at Ilminster before the final leg home. Coasted onto the drive at 0156hrs.

Yep, a long old day but one I don't regret cos I'm now the proud owner of...

Image



:D

Very clean on an 08 plate with 27K miles, sport pack, a FMDSH and a few choice nick nacks. Now I've got to sort the UK registration. Will need a mph speedo first mind... 8). Oh yes, those GS pot protectors will have to go too :pukeright:

Mike

Posted: Mon Apr 27, 2015 10:29 pm
by slparry
nice :)

Posted: Mon Apr 27, 2015 10:32 pm
by Mitch1100
Very noice in yellow..protectors look fine! Friend has just spent $300aud replacing scratched head cover on his RT after simple topple...now has protectors :wink:

Posted: Tue Apr 28, 2015 9:52 am
by popsky
When I started reading and you were on a plane going to Ireland I thought he's off into cloud cuckoo land :lol: then I got to the…

Saw bike - liked bike - studied paperwork - bought bike :D

Very nice Mike, I know you were interested in Roloo's but didn't realise you were so close to purchase 8)

Now all you need is a nice trip to Jedburgh to make sure everything is working as it should.

Posted: Tue Apr 28, 2015 1:23 pm
by dave the german
Nice!! It appears to have all the right nick nacks too

Posted: Tue Apr 28, 2015 1:28 pm
by Hayden
Lovelly looking bike, great in that colour, long day but well worth it.
congrats

Steve :thumbleft:

Posted: Tue Apr 28, 2015 3:02 pm
by Boxermed69
If I can get it UK registered in time Jedburgh is a distinct possibility,but I shan't go trying to book accommodation until then.

Mike :)

Posted: Tue Apr 28, 2015 8:19 pm
by nab 301
Very nice , if I'd known, I could have .... bought you a cup of tea :lol:

Posted: Tue Apr 28, 2015 9:06 pm
by andy griff
Very nice,

Yellow being the best colour and all !

Posted: Wed Apr 29, 2015 4:34 am
by dave the german
needs some stickers :wink:

Posted: Wed Apr 29, 2015 11:38 am
by Boxermed69
Hmmm, needs a few more 'nick nacks' (ooh, I am a sucker for a bitta carbon) and, yes Dave, some special stickers :wink:

While I have the floor: have sorted out the required EC Certificate of Conformity for registration purposes. There are various 'expert' services advertising online offering to procure your CofC, costing from £40 to 140 Euros! I phoned BMW UK - one email later the document's on it's way...FOC :D

Mike :)

Posted: Wed Apr 29, 2015 12:32 pm
by popsky
Boxermed69 wrote:Hmmm, needs a few more 'nick nacks' (ooh, I am a sucker for a bitta carbon) and, yes Dave, some special stickers :wink:

While I have the floor: have sorted out the required EC Certificate of Conformity for registration purposes. There are various 'expert' services advertising online offering to procure your CofC, costing from £40 to 140 Euros! I phoned BMW UK - one email later the document's on it's way...FOC :D

Mike :)


Do you need new clocks Mike, it seems you can't change the odometer from Km to miles, my local service manager seemed to think you could fiddle with button configs to alter but I couldn't do it, (was trying in case someone bought Roloo's), there's nothing I could see in the owners or workshop manual, as a stop gap you could just change the face plate, a link's been on this board before but can't remember under which heading,

Posted: Wed Apr 29, 2015 4:03 pm
by Topcat
Lovely bike, hope you enjoy it.

Do you need to change the clock to miles? Daughters Kymco has a km clock and has no bother with mot's etc? We just put a few neat stickers to mark 30, 50 and 60mph positions.

My R12's speedo is way off anyway, indicated 50 is about 43, 44, and 100 is approx 90, on the track of course, cough cough.

Posted: Wed Apr 29, 2015 5:00 pm
by Boxermed69
TC and Phil,

I'm working on the speedo problem now. I did do a bit of research before going to Ireland. Firstly, a new instrument assembly (as you know it's all in one) would cost £635 from a UK main dealer :shock: . Well, obviously that ain't gonna happen :) . There's a firm in Das Vaterland called Heiler Tachodesign who'll knock up an OE spec (or whatever spec you want) speedometer face for 75 Euros. I've also been in contact with Peter Bond who's a bike instrument specialist in the UK. Though he majors on refurbing/remanufacturing stuff for classic bikes he does also dabble with modern kit and comes highly recommended. His concern is that BMW may have bonded the needle onto the shaft such that, when you try to remove it, you end up pulling the guts out of the delicate coil assembly within, ergo one scrap speedo :? He'll charge £180 for the whole job including making the new speedo face if successful. If not, it'll be £35 and I'll get my broken instruments back :D. The way I see it, he's the best bloke for the job - I'm certainly not going to mess with it, and I've only got £35 to lose.

I'm assured that the odometer and trip meters can be changed to read in miles, but it requires the wizz-bang machine at a MD to be plugged in (ker ching! :roll: ).

Unfortunately the good ol' DVLA require proof that a mph conversion is 'proper'. They specifically state that the mph scale must be under the protective perspex and not just a sticker on top. By proof they mean a pukka receipt for new parts or work done and/or photographs. If they're not satisfied with the evidence they can send you to a VOSA test centre to have it examined (ker ching! :roll: )

So, will be looking to send the instruments to Peter Bond tomorrow. Fingers crossed... :?

Mike

Posted: Wed Apr 29, 2015 5:08 pm
by popsky
Are you a customer of CW? If so give them a call re changing the odometer to miles,

Have a look at ukgs'ers forum there may be some help in there