Hello from Ayrshire

Please introduce yourself...

Moderators: Gromit, Paul, slparry

golfgeezer
Posts: 18
Joined: Tue Jan 08, 2013 6:05 pm
Location: Ayrshire

Hello from Ayrshire

Postby golfgeezer » Tue Jan 08, 2013 6:20 pm

Hi folks

Just joined although not new to owning a BMW bike as I had a 2002 R1150GS a few years ago and had to sell it due to circumstances at the time :cry:

There seems to be quite a price difference between an GS and an R1100S which makes the sportier model appealing at the moment.

I know of the usual corrosion issues but is there any other areas that I need to be aware of when looking at these models? Also is the riding position any good for mid -long distances? Also how many miles to a tank on average?
Ex R1150GS owner....loved that bike :)
Ex R1150R owner...not good experience :cry:
Ex R1200S owner....should have kept it :roll:

User avatar
dave1100s
Member
Posts: 736
Joined: Tue Sep 23, 2008 12:32 pm
Location: Formby, Merseyside

Postby dave1100s » Wed Jan 09, 2013 5:06 pm

Welcome along mate. You must be either younger or in better condition than me as I went the other way a couple of years ago and swapped my 1100s for a GS :D Loved the 11s for the four years I had it, but it got to the point were my back ached like a b*****d after only about 50 miles or so, which on my last trip around France was a real pain in the arse.......well back actually :D
Used to do regular 400-500 mile days no problem with a usual tank range of about 125 miles to the fuel light and I never risked more than about 20 miles with the light on! Didn't seem to make much difference how it was ridden either. Enjoy the bike mate (you're in the ideal spot, some great roads up your way) and enjoy the site :D You'll find this lot a friendlier bunch than on that site that is for your previous bike :)
We don't stop playing because we get old.....we get old because we stop playing!

McBoxer
Member
Posts: 488
Joined: Wed Jul 11, 2012 2:53 pm
Location: West Midlands

Postby McBoxer » Wed Jan 09, 2013 10:08 pm

Welcome on board!
Big Scottish Al
____________
1982 BMW R65LS
1̶9̶9̶9̶ ̶B̶M̶W̶ ̶R̶1̶1̶0̶0̶S̶
2004 BMW R1150R Rockster 80 Jahre

Triton
Posts: 21
Joined: Sat Oct 20, 2012 6:37 pm
Location: Dundee, Scotland

Postby Triton » Thu Jan 10, 2013 1:42 pm

Welcome to another Scottish member.
R1200ST '07, R1100RS '96, F650ST '99, Triton 650 '59

User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Hello from Ayrshire

Postby nab 301 » Thu Jan 10, 2013 8:20 pm

golfgeezer wrote: Also is the riding position any good for mid -long distances? Also how many miles to a tank on average?


Approx 10 miles to the litre in steady state touring mode , can drop drastically in city centre /on off throttle mode.
I'd certainly be looking for petrol at 130 miles , the tank can be drained in under 100 miles though :shock:
The 11 s has never been my most comfortable bike ,( i've owned it since '03 , )but I have done long days, recently fitted lowered pegs and raised the bars slightly , it really needs the seat to be modded slightly and then could be perfect.
I have done a lot of miles in recent years on a Deauville.... depending on the trip , the better tank mileage and economy was usually the reason for choosing it on the day along with slightly better comfort.
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

User avatar
tanneman
Member
Posts: 1203
Joined: Wed Mar 04, 2009 8:26 pm
Location: Terra Firma

Postby tanneman » Tue Jan 29, 2013 6:15 pm

Welcome to the forum. Yes about 10 miles to the litre. That drops to about a tank for the morning session at a track day.
'Let me check my concernometer.'

User avatar
R-man
Member
Posts: 207
Joined: Sun Nov 18, 2007 10:47 am
Location: East Suffolk
Contact:

New to the S

Postby R-man » Mon Feb 04, 2013 9:08 pm

Good choice - the S is one of the last of the great all-rounders, it'll do anything from 2-up touring to scratching a track day.

As others have mentioned, the seat was quite thin from the factory, and hardens with age...plenty of notes here as some of us have rebuilt them...and experiment with a few psi (4 or 5) less tyre prerssure too.

If it runs smoothly, keep it maintained (yourself) and the miles will fly by - but once things grow lumpy, do not delay get help, by searching and asking a question here...we are a knowledgeable crew!

The boxer engines love good clean oil, and hate overheating. The stock air filter (or K&N replacement) is painfully small so look up the 'Val Singleton' air filter mod, and keep an eye open for a Y-piece to replace the catalyst.

Enjoy
R1100S current
K1200RS (2005-07) Autobahn-stormer
V-Strom (2004-05)
VFR800 (2003-04)
-in the 70s & 80s there were lots more...

User avatar
HerrFlick
Posts: 393
Joined: Thu Dec 27, 2012 7:25 am
Location: Brisbane, Australia.

Postby HerrFlick » Tue Feb 05, 2013 10:26 am

Hi Golfgeezer.

After you and the 'S' have settled in and you've done the Zero=Zero procedure to balance and synchronise the throttle bodies, and before you do any other performance mods, fit the 1100/1150GS intake tubes and then see how much more performance you want. :)

I got:

- serious extra go beyond 4000rpm.
- always looking for 7th while cruising at 70-75 mph.
- better fuel consumption: from 140 miles per 16 litres to 180 miles now. (2 litres left in the tank at refill).
- if I thrash up the twisty roads on a 2000ft range near here I'll drop back to abt 140 miles/tank.
- rid of all fueling and surging complaints.

Have a look at my how-to post in Boxer Performance.


Seating position:

-I'm 6'4'' tall. I have the sports bars above the upper triple clamp.

- my major problem was preventing myself sliding forward onto the tank under hard braking, especially on steep down hills. (BMW seem to have a thing about geting you on the tank on all their bikes. R1200GS - arrrggghhh!).

- so: I've remove a lot of the foam in the rear half of the seat and raised the front by putting an 18mm rubber block under the front edge to reduce the forward slope in the seat.

This is reasonably effective but will have to suffice until I get around to making my own carbon fibre seat base.

It's quite comfortable for 200 mi start/stop rides, but my new base will have a that bit more finesse to allow 600 mi+ touring days.


Cheers

John C.

aka HerrFlick.
Real torque curves don't have a first derivative. :-^)

User avatar
HerrFlick
Posts: 393
Joined: Thu Dec 27, 2012 7:25 am
Location: Brisbane, Australia.

Re: Hello from Ayrshire

Postby HerrFlick » Tue Feb 05, 2013 10:53 am

nab 301 wrote:
Approx 10 miles to the litre

it really needs the seat to be modded slightly and then could be perfect.




"10 miles to the litre" :toothy10: :toothy10: :toothy10:

Oh my gawwwdddd !!!

Talk about mixed (up) units.

The metric system consumption measure is litres/100km.
The Imperial system uses miles per imperial gallon.

Blokes out here start with km/(their tank) and work back from there to a km/litre number.

Shouldn't be long before someone comes up with 'wee drams/cm' or 'furlongs/deci-litre'

Arrrhhh - don't mind me - I get in these moods from time to time.


Re seat mod to make it perfect: watch this space.


:bounce:


.
Real torque curves don't have a first derivative. :-^)

User avatar
HerrFlick
Posts: 393
Joined: Thu Dec 27, 2012 7:25 am
Location: Brisbane, Australia.

Postby HerrFlick » Tue Feb 05, 2013 11:05 am

I'll have to contact you when I arrange my scottish summer highlands riding tour. Since the time window is abt 4 1/2 days notice may be short. :wink:

Did I mention I'm a descendant of Red Comyn?

And I play golf too.

(should get me in the good books)

:)

.
Real torque curves don't have a first derivative. :-^)

User avatar
Boxered
Route Master
Posts: 3079
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Re: Hello from Ayrshire

Postby Boxered » Tue Feb 05, 2013 11:08 am

HerrFlick wrote:

"10 miles to the litre" :toothy10: :toothy10: :toothy10:

Oh my gawwwdddd !!!

Talk about mixed (up) units.

The metric system consumption measure is litres/100km.
The Imperial system uses miles per imperial gallon.
.


The trouble is we buy our fuel by the litre but still use miles for distance :roll:

Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware

User avatar
ned1
Member
Posts: 1485
Joined: Wed May 14, 2008 1:30 pm
Location: Herts UK
Contact:

Re: Hello from Ayrshire

Postby ned1 » Tue Feb 05, 2013 11:31 am

Boxered wrote:
HerrFlick wrote:

"10 miles to the litre" :toothy10: :toothy10: :toothy10:

Oh my gawwwdddd !!!

Talk about mixed (up) units.

The metric system consumption measure is litres/100km.
The Imperial system uses miles per imperial gallon.
.


The trouble is we buy our fuel by the litre but still use miles for distance :roll:

Steve


Hi,
As measurements have come up can someone tell me if the uk gallon is the same as one from across the pond (USA).

:protest:
Yesterday R1100S 03, today K1300s sport
Ride like they are all out to kill you and you will live to ride another day............Ned 2008

User avatar
Blackal
Posts: 8261
Joined: Fri Jul 29, 2005 7:53 pm

Re: Hello from Ayrshire

Postby Blackal » Tue Feb 05, 2013 11:33 am

HerrFlick wrote:[
"10 miles to the litre" :toothy10: :toothy10: :toothy10:

Oh my gawwwdddd !!!

Talk about mixed (up) units.

The metric system consumption measure is litres/100km.
The Imperial system uses miles per imperial gallon.

Blokes out here start with km/(their tank) and work back from there to a km/litre number.

Shouldn't be long before someone comes up with 'wee drams/cm' or 'furlongs/deci-litre'

Arrrhhh - don't mind me - I get in these moods from time to time.


Re seat mod to make it perfect: watch this space.


:bounce:


.


Doesn't matter - the ability to get one of the units into a round number (10) and be able to easily calculate the tank range (18 x 10) makes it all worthwhile.

We use miles, because....................

Well, because - they're "miles" better (and don't you forget it!) :twisted:

Al :)
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

User avatar
Boxered
Route Master
Posts: 3079
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Re: Hello from Ayrshire

Postby Boxered » Tue Feb 05, 2013 11:54 am

ned1 wrote:
Hi,
As measurements have come up can someone tell me if the uk gallon is the same as one from across the pond (USA).

:protest:


No Ned, an Imperial gallon (uk) is equal to 1.2 US gallons (roughly) which is why fuel consumption figures differ between us and the US.

Steve
Well-weathered leather

Hot metal and oil

The scented country air

Sunlight on chrome

The blur of the landscape

Every nerve aware

User avatar
HerrFlick
Posts: 393
Joined: Thu Dec 27, 2012 7:25 am
Location: Brisbane, Australia.

Re: Hello from Ayrshire

Postby HerrFlick » Tue Feb 05, 2013 1:26 pm

Boxered wrote:
ned1 wrote:
Hi,
As measurements have come up can someone tell me if the uk gallon is the same as one from across the pond (USA).

:protest:


No Ned, an Imperial gallon (uk) is equal to 1.2 US gallons (roughly) which is why fuel consumption figures differ between us and the US.

Steve



Then there's the Canadian gallon...

The yanks have some unflattering term for it. As do the Canadians re the US gallon on their side of the border.


Oh God - grant me the serenity
to accept the things I cannot change;
the courage to change the things I can;
and the wisdom to know where to bury those who have infuriated me.


.
Real torque curves don't have a first derivative. :-^)


Return to “New Trixters?”

Who is online

Users browsing this forum: No registered users and 52 guests