new r1100s owner PhilipS64

Please introduce yourself...

Moderators: Gromit, Paul, slparry

PhilipS64
Posts: 2
Joined: Mon Aug 05, 2024 11:44 pm

new r1100s owner PhilipS64

Postby PhilipS64 » Tue Aug 13, 2024 9:21 pm

Hello Boxertrix -

Trading Up to a Boxer
An r1100s from 2002 in Frost- Blau - I'm delighted with it
Having px my f800s for its older bigger brother - what a good decision
I have only gone 90 miles so far and just getting used to the charming rocking and clunking

It has a 12v cigarette type power socket on stem below the dash - having tried a optimate battery charger plug-in, no joy charging - no other power socket (the smaller can bus type).
I will fit a battery tender lead to the terminals - where do folks typically route the plug to rest

thanks in advance for any guidance
PhilipS64
r1100s frost-blau.jpg
at the dealers showroom
r1100s frost-blau.jpg (680.28 KiB) Viewed 2060 times

User avatar
jeznewsome
Posts: 341
Joined: Sat Aug 04, 2012 7:30 am
Location: Preston, Lancs

Re: new r1100s owner PhilipS64

Postby jeznewsome » Wed Aug 14, 2024 6:41 am

I used to route an optimate lead to the area under the riders seat.

As you will find getting to the battery is a bit of a faff! Don't forget to remove the bolts under the BMW badge on the sides of the front fairing when removing it for access
Last edited by jeznewsome on Wed Aug 14, 2024 12:35 pm, edited 1 time in total.

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2888
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Re: new r1100s owner PhilipS64

Postby Paul » Wed Aug 14, 2024 11:37 am

Welcome on board Philip!

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

PhilipS64
Posts: 2
Joined: Mon Aug 05, 2024 11:44 pm

Re: new r1100s owner PhilipS64

Postby PhilipS64 » Wed Aug 14, 2024 11:58 pm

Thanks. Yes those inside the bodywork fastenings are a tester.....
I appreciate the advice tips and welcome

User avatar
slparry
Moderator
Posts: 6690
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: new r1100s owner PhilipS64

Postby slparry » Mon Aug 19, 2024 2:25 pm

Hi Phil,

pop the OEM socket kit on. it fits just above the left footrest on the frame joint of aluminium frame to rear sub frame

https://www.motorworks.co.uk/auxiliary- ... 399-1.html
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1


Return to “New Trixters?”

Who is online

Users browsing this forum: No registered users and 10 guests