Seeing the light?

Please introduce yourself...

Moderators: Gromit, Paul, slparry

meds8964
Posts: 101
Joined: Mon Apr 01, 2013 5:48 pm
Location: NORTH WALES

Postby meds8964 » Sat Jun 29, 2013 8:43 pm

welcome on board, im sure you will be pleased with it as much as i am when you finally take the plunge good luck
IF YOU THINK IM UGLY YOU WANNA SEE MY BROTHERS

Spud
Member
Posts: 26
Joined: Tue Jun 13, 2006 10:24 pm
Location: Deepest, darkest Lanarkshire

Postby Spud » Mon Jul 01, 2013 8:03 am

conkerman wrote:Just to add an observation,

My experience with bikes is that you are best not restricting yourself on distance to view.

My R1100 was from Edinburgh and I am near Oxford.

Just saying like :)


I bought my 23 year old Defender from Leeds so I'm no stranger to the concept. :)
I've dropped the guy in Wales a line with some questions ... FlyBe to Cardiff and ride home might well be a plan ....
8)

Spud
Member
Posts: 26
Joined: Tue Jun 13, 2006 10:24 pm
Location: Deepest, darkest Lanarkshire

Postby Spud » Wed Jul 03, 2013 11:29 am

... and having spoken with the gent in question ... deposit being placed and just the logistics to work out over the next week. 8)

Spud
Member
Posts: 26
Joined: Tue Jun 13, 2006 10:24 pm
Location: Deepest, darkest Lanarkshire

Postby Spud » Fri Jul 19, 2013 3:06 pm

To cut a long story short, despite flinging myself from my mountain bike last weekend and scuffing and taking lumps out of my knees and elbows, opening up my chin having a chest that looks like I've been used for kick boxing practice ... I ended up heading for Wales last Tuesday (flight from Glasgow only delayed by nearly four hours ...) and picked up the R1100S I had bought. I rode it back up through mid Wales (stunning roads and scenery and perfect for getting to know the new bike on) and then slogged my merry way from Chester back up towards deepest darkest Lanarkshire, putting the bike in the garage after leaving home a mere 18 hours previously.

Summary so far?
    Don't set off in 28C temperatures with the heated grips on - it doesn't help.
    I don't know if this bike has been lowered in some way, but the seat is very much closer to the deck than I expected. When on the centre stand, there's not that much clearance from the base of the rear wheel to the floor. Result? There's not as much room between pegs and seat as I expected.
    It loves swinging bends - absolutely one of the sweetest swinging bikes I've had the pleasure of riding.
    It's not so happy moving through heavy town traffic ... what is the tick-over meant to be on this? (No owner's manual with the bike ....)
    When cruising on A-roads or Motorways it thrums along superbly.
    I really do like it! :D

User avatar
nab 301
Member
Posts: 2375
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Postby nab 301 » Fri Jul 19, 2013 7:18 pm

Spud wrote:I don't know if this bike has been lowered in some way, but the seat is very much closer to the deck than I expected. When on the centre stand, there's not that much clearance from the base of the rear wheel to the floor. Result? There's not as much room between pegs and seat as I expected.

It's not so happy moving through heavy town traffic ... what is the tick-over meant to be on this? (No owner's manual with the bike ....)
[/list]

Glad you like the bike !
The seat is quite low on the R1100s , some (incl me in recent years ) have remodelled
the seat and fitted lowered pegs ... :oops:
Idle should be around 1050 rpm when warm, and servicing/balancing the throttle bodies may improve the low speed performance.
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..


Return to “New Trixters?”

Who is online

Users browsing this forum: No registered users and 39 guests